https://JOBS.IMKO.COM/ en-us Shift: Days and hours vary  Pay: $17/hr
Key Responsibilities & Qualifications

• Handle credit card transactions with a Point of Sale (POS) system.
• Prepare and serve concessions to fans, ensuring a positive experience.
• Work scheduled shifts, with a strong preference for candidates who can commit to all game dates.
• Must be at least 18 years of age.
• Requires prior cashiering or server experience.
• Candidates must be able to provide two forms of valid identification and pass a background check.

Must be available: 9/3/26, 9/19/26, 10/3/26, 10/10/26, 11/7/26, 11/21/26, 11/28/26
Weekly Pay#INDJEFF]]> Fri, 07 Aug 2026 00:00:00 CDT 0 Responsibilities:-Expedient and accurate handling of merchandise into and/or out of the warehouse/facility. -Moving incoming or outgoing merchandise throughout the distribution center by hand, hand truck, or forklift. -Check, verify and audit merchandise to ensure that ordered merchandise has been received without damage or defect. -Identify, separate, label, and palletize merchandise onto flats.-Replenish pick area and load outgoing merchandise.
Qualifications: -Knowledgeable in Data Entry-Basic knowledge of simple math concepts.-Good communication skills.-Able to use Radio Frequency Units-Able to maintain annual certifications
Experience and Education:-Must be at least 18 years of age-High School Diploma or Equivalent-Experience working in either a warehouse or automated distribution center environment preferred.-Experience with Warehouse Management Systems helpful but not required.
Working Conditions:-Must be able to lift up to 25 lbs. on a regular basis, and on occasion, up to 65 lbs. using team lift.-Must be able to walk long distances, including up and down stairs-Must be able to stand, bend, stoop, squat, kneel, reach and push on a repetitive basis above and below shoulder level.-May work up to 12-hour shifts.-Climate controlled
Weekly Pay and Benefits#INDJEFF
]]> Fri, 07 Aug 2026 00:00:00 CDT 0 Shift: Monday - Friday 6 am - 2: 30 pmPayrate: $28/Hr
This role requires an experienced carpenter with strong measuring and layout skills. Responsibilities include reading blueprints, building and modifying forms, using saws and nail guns, measuring angles, and performing detailed finish carpentry work in a precast manufacturing environment. 
Applicants should be reliable, detail oriented, and able to pass both a background check and a 10 panel drug test.
Weekly pay and Benefits
#INDJEFF]]> Fri, 07 Aug 2026 00:00:00 CDT 0 Shift: Monday - Friday 6 am - 2: 30 pmPayrate: $19/Hr
This role supports general precasting production operations, including preparing forms, assisting with concrete pours, material handling, cleaning the work areas, and helping maintain production flow. Candidates need to be reliable, comfortable working in a manufacturing environment, able to read a tape measure accurately, and be able to pass a 7-year background check.
Must wear sturdy work pants or jeans. No joggers or shorts. Must have own steel-toed or composite-toed boots. It is also helpful but not mandatory to have own tools such as: tape measure, framing hammer, scraper/5-way tool, side-cut pliers, and a tool bucket/bag. 

Weekly pay and Benefits
#INDJEFF]]> Fri, 07 Aug 2026 00:00:00 CDT 0 Skills Needed:

• Mechanical Repair - Various types of Production equipment / General Maintenance
• Electrical Repair and Installation as needed - PLC / Controls / Multi-phase wiring
• Hydraulics - Cylinders / Pumps / Control Valves
• Pneumatics - Cylinders / Control Valves / General Tools
• Troubleshooting - Evaluate and repair any given unit for any issue
• Welding - Basic welding skill required to aid in existing types of possible maintenance or repair issues
• Automotive - Basic Mechanical skills / Forklift repair and or maintenance / Possible Semi-trailer and minor truck repair or maintenance
• Plumbing - General Mechanical / Machine Plumbing / Pneumatics Plumbing / Electrical Conduit / Possible Water
• Weekly Inspections as required.
• Parts procurement and planning for all assigned projects given.
• Develop new ideas and concepts.

Qualifications: Candidate must possess 2+ years of experience in industrial maintenance.Candidate should be safety-minded.Good attendance and punctuality are required.  Dress code requirements include steel-toed boots and long pants.Must be able to pass a background check and 10-panel drug test.Employer does not allow THC.
Weekly pay, benefits, and time off.
#INDJEFF]]> Fri, 07 Aug 2026 00:00:00 CDT 0 This position utilizes a forklift to move items around the facility grounds, so it will be outside for most or all of the work day.
Responsibilities:

• Safely operate forklifts to transport materials to and from designated areas.
• Load and unload trucks and trailers accurately and efficiently.
• Inspect forklifts daily for any mechanical issues and report them to maintenance.
• Follow all safety procedures and regulations.
• Assist with other tasks as needed.

Qualifications:

• Valid forklift operator license.
• Strong mechanical aptitude.
• Ability to work in a fast-paced environment.
• Excellent attention to detail.
• Physical ability to lift and move heavy objects.
• Must be able to accurately read/use a tape measure.

Steel-toe boots and long pants are required. Must be able to pass a background check and 10-panel drug test.  Employer does not allow THC.
Weekly pay, benefits, and time off.
#INDJEFF]]> Fri, 07 Aug 2026 00:00:00 CDT 0

Handle both inbound and outbound calls in a professional, friendly, and timely manner.

Engage with potential and current customers to promote our services and close sales.

Guide callers through the sales process by actively listening to their needs and recommending suitable storage solutions.

Provide an excellent customer experience by addressing caller inquiries, overcoming concerns, and creating a sense of urgency.

Accurately record caller information and sales details.

Adhere to key performance indicators related to call volume, conversion rates, and customer satisfaction.

Stay up-to-date on all our features, procedures, and benefits.

  What We' re Looking For:

• Applicants must possess a high school diploma or GED.
• 6+ months of call center, clerical, or customer service experience is required.
• Excellent oral and written communication skills, time management, and a professional demeanor.
• Typing speed of 35-40 wpm. The ability to work on a computer and navigate the internet is essential.
• Physical Demands: This is a sedentary role that requires sitting for extended periods.

  Ready to join our team? Apply now!  We offer weekly pay and benefits.#INDJEFF]]> Fri, 07 Aug 2026 00:00:00 CDT 0 IMKO is seeking experienced Forklift Operators for a local manufacturing company. If you have a strong safety record and are looking for a dynamic work environment with competitive pay, we encourage you to apply!
Schedule:

• Rotating 12-hour shifts
• Day Shift: 6: 00 AM - 6: 00 PM
• Night Shift: 6: 00 PM - 6: 00 AM

Pay:

• $20 per hour

Qualifications:

• Minimum of 3 years of verifiable forklift operation experience.
• Ability to pass a written and performance-based forklift operation test.
• Strong understanding of warehouse safety procedures.
• Excellent attention to detail and organizational skills.
• Ability to work effectively in a fast-paced manufacturing environment.

Responsibilities:

• Safely operate forklifts to move, stack, and retrieve materials within the manufacturing facility.
• Load and unload trucks, ensuring proper handling of goods.
• Perform daily equipment checks and minor maintenance.
• Adhere to all safety guidelines and company policies.
• Maintain a clean and organized work area.

Weekly pay, benefits, and time off.
#INDJEFF







]]> Fri, 07 Aug 2026 00:00:00 CDT 0 Job Description: Sets up and operates rivet machine to rivet together rolled corrugated sheet metal according to work orders and specifications.Uses an overhead chain hoist to position 2-foot sections of rolled sheet metal over punch and anvil to create holes and affix rivet to sheet metal through hammer action. 
Qualifications: The ideal candidate will have at least 6 months of manufacturing/machine operating experience.Candidate MUST be able to use/read a tape measure accurately.Candidate should be safety-minded.Good attendance and punctuality are required.  Must have your own steel-toed or composite-toed boots.  Must be able to pass a 7-year background check and 10-panel drug test.Employer does not allow THC.
Weekly pay, benefits, and time off.
#INDJEFF]]> Fri, 07 Aug 2026 00:00:00 CDT 0 Job Description: We are seeking a dependable General Laborer to support daily operations at a local metal culvert manufacturing facility. In this role, you will provide essential physical labor and ground support to keep the production line moving safely and efficiently.
Qualifications: The ideal candidate will have at least 6 months of manufacturing/machine operating experience.Candidate MUST be able to use/read a tape measure accurately.Candidate should be safety-minded.Good attendance and punctuality are required.  Must have your own steel-toed or composite-toed boots.  Must be able to pass a 7-year background check and 10-panel drug test.Employer does not allow THC.
Weekly pay, benefits, and time off.
#INDJEFF]]> Fri, 07 Aug 2026 00:00:00 CDT 0

Pull parts for orders 

Inventory Management

Shipping & Receiving -Unload freight – Compare shipments with Purchase orders – Stock shelves  

Transport parts to local customers 

Be familiar with the roads and safety regulations.

Stay on schedule, take the shortest routes possible.

Customer Service skills 

Keeping warehouse clean 

Capability of lifting 50 + pounds and stand/walk for long shifts 

Basic computer skills for inventory lookup and a functional knowledge if heavy duty truck and trailer part 

Other duties as assigned 

Pay -$18 -$20 DOE

    Apply online www.imko.com - Stop into the IMKO office between 9 AM - 3 PM

 #INDSCTY]]> Thu, 06 Aug 2026 00:00:00 CDT 0

Provide account service – check casing - withdrawals and deposits 

Customer Service - Answering calls and questions about accounts

Maintain Customer and bank confidentiality 

Maintain cash drawer 

Recording transactions, logging checks and preparing transaction reports

Counting and packaging currency  

  What you will make as a Bilingual Bank Teller  Starting pay $17IMKO Pays Weekly on Fridays!
  IMKO offers Paid Holidays and Paid Vacation
  Apply online www.imko.com - Stop into the IMKO office between 9 AM - 3 PM
  IMKO offers Medical Coverage - Access to affordable and comprehensive group medical coverage. If you have questions, please call us at 712-224-2480 #INDSCTY]]> Thu, 06 Aug 2026 00:00:00 CDT 0 Core Responsibilities

• Room Turnover: Clean and sanitize guest rooms, including stripping linens, making beds to hotel standards, dusting, vacuuming, and mopping.
• Bathroom Sanitization: Thoroughly scrub and disinfect toilets, showers, tubs, and sinks; replenish towels and toiletries.
• Common Areas: Maintain cleanliness in hallways, elevators, and lobby areas as assigned.
• Supply Management: Keep your cleaning cart organized and notify the supervisor when cleaning supplies or guest amenities are running low.
• Safety & Compliance: Follow all health and safety protocols, including the proper use of chemical cleaners and reporting any maintenance issues (broken lights, leaky faucets) immediately.

What We’ re Looking For

• Reliability: You show up on time and ready to move.
• Physical Stamina: Ability to lift up to 25 lbs, stand for long periods, and perform repetitive movements (bending, reaching, kneeling).
• Detail-Oriented: You notice the small things, like a smudge on a mirror or a stray hair.
• Professionalism: A friendly demeanor when interacting with guests and a respect for their privacy.

Schedule & Requirements

• Schedule: 9 am - 5 pm (August 7th - 12th)
• Pay Rate: $15.50/hr
• Dress Code: Black or dark blue pants/shirts and tennis shoes are required. Headwear, including caps or do-rags, is not permitted during shifts, except where required for documented medical reasons or religious practices.
• Previous experience in hotel housekeeping or professional cleaning is a plus

Weekly Pay#INDJEFF]]> Thu, 06 Aug 2026 00:00:00 CDT 0 What You' ll Do

• Operate production equipment and assemble quality products.
• Inspect parts and ensure products meet quality standards.
• Perform basic machine changeovers and preventative maintenance.
• Troubleshoot minor equipment issues.
• Keep your work area clean and safe.
• Work with your team to keep production running efficiently.

What We' re Looking For

• Manufacturing experience is a plus, but we' re willing to train motivated individuals.
• Strong work ethic and reliable attendance.
• Ability to lift up to 50 lbs.
• Willingness to learn and work in a fast-paced environment.
• Basic reading and math skills.

Shift Options1st Shift

• Monday– Thursday | 5: 00 AM – 3: 00 PM
• Overtime Fridays | 5: 00 AM – 1: 00 PM

2nd Shift

• Monday– Thursday | 3: 00 PM – 1: 00 AM
• Overtime Fridays | 1: 00 PM – 9: 00 PM

Before You Start

• Two forms of valid ID required for employment eligibility.
• Must successfully pass a pre-employment background check.

Why Adams Thermal?

• Starting pay of $20.00/hour
• Gas Incentive
• Four-day work week
• Overtime opportunities
• Long-term career growth
• Clean, team-oriented manufacturing environment

#INDSXF]]> Thu, 06 Aug 2026 00:00:00 CDT 0

Perform general maintenance and repairs on residential units and property.

Respond promptly to maintenance work orders.

Repair and maintain plumbing, electrical, flooring, painting, and other building systems.

Use hand and power tools safely and effectively.

Participate in an on-call rotation, available 24 hours a day for one week each month.

Qualifications:

• Strong plumbing knowledge preferred.
• Basic knowledge of HVAC, electrical, and structural systems.
• Experience using hand and power tools.
• Ability to work independently and follow directions.
• Excellent communication and customer service skills.
• Physical stamina to perform maintenance duties.
• High school diploma or GED required.
• Valid driver' s license required.

Why Work with IMKO Workforce Solutions?

• Full-time, stable Monday– Friday schedule.
• Opportunity to work with a respected Housing Cooperative.
• Supportive team environment.
• Weekly pay and career growth opportunities.

Apply today and start your next career with IMKO Workforce Solutions!
#INDKC]]> Wed, 05 Aug 2026 00:00:00 CDT 0 IMKO is seeking dependable and mechanically inclined individuals to fill Packaging Associate positions for a manufacturing facility in Jefferson City, MO.
Schedule:

• Rotating 12-hour shifts 2/2/3
• Night Shift: 6: 00 PM - 6: 00 AM
• Day Shift: 6am to 6pm

Pay:

• $20 per hour

Qualifications:

• At least 6 months of consistent experience in a manufacturing or production environment.
• Strong mechanical aptitude and the ability to troubleshoot equipment.
• Ability to lift up to 50 lbs. and perform physically active work throughout a 12-hour shift.
• Must be able to pass a drug test and background check.

Responsibilities

• Operate and monitor high-speed packaging equipment to ensure smooth and efficient production.
• Perform regular quality checks on product weight and appearance.
• Adjust controls as needed to keep production within set standards.
• Identify and clear minor equipment issues or product jams.
• Complete necessary documentation and line reporting.
• Retrieve and load packaging materials as required.
• Follow safety procedures and report any issues to the supervisor or maintenance team.

Weekly pay, benefits, and time off.
#INDJEFF]]> Mon, 03 Aug 2026 00:00:00 CDT 0 Mon, 03 Aug 2026 00:00:00 CDT 0 This is primarily an outside, field-based position involving regular interaction with customers, construction crews, subcontractors, vendors, suppliers, and company staff.
Construction knowledge and experience are important, but strong people and project-management skills are paramount. This person must be able to listen, communicate clearly, work through challenging situations, and maintain productive relationships while keeping projects moving toward completion.The ideal candidate understands that successful project management requires more than scheduling and construction knowledge. It also requires patience, organization, accountability, good judgment, and the ability to bring customers, crews, vendors, and staff together around a common goal.
Primary Responsibilities

• Coordinate residential and specialty construction projects from planning through completion.
• Serve as a primary point of contact for customers throughout the construction process.
• Visit job sites regularly to monitor progress and address concerns.
• Communicate with crews, subcontractors, vendors, suppliers, and office staff.
• Coordinate project schedules, labor, materials, deliveries, and changing priorities.
• Provide customers with clear and professional project updates.
• Work through delays, misunderstandings, workmanship concerns, and other challenging situations.
• Identify potential problems early and help develop practical solutions.
• Help ensure projects are completed according to plans, expectations, and company standards.
• Maintain organized project notes, updates, decisions, and follow-up items.
• Manage project changes and ensure they are communicated to everyone involved.
• Support projects through completion and customer handoff.

Required Qualifications

• Previous construction experience involving residential homes or similar building projects.
• Project management, construction supervision, superintendent, or field-leadership experience.
• Strong communication, listening, and relationship-building skills.
• Ability to handle difficult conversations and challenging situations professionally.
• Strong organization, problem-solving, and follow-through.
• Ability to work effectively with customers, crews, subcontractors, vendors, and office staff.
• Working knowledge of construction plans, materials, schedules, and job-site processes.
• Ability to manage multiple projects and priorities.
• Valid driver’ s license and acceptable driving record.
• Ability to travel regularly to project sites throughout Central Missouri.

Preferred Experience

• Residential home-building experience.
• Pole-barn, post-frame, barndominium, metal-building, or agricultural construction experience.
• Experience communicating directly with homeowners.
• Experience coordinating subcontractors, vendors, materials, and project schedules.
• Ability to read plans, drawings, scopes of work, and change orders.

Position Details

• Direct-hire opportunity
• $70, 000–$80, 000 annually DOE
• Primarily outside and field-based throughout Central Missouri
• Company truck provided for work-related travel and commuting to and from home
• Eligible for year-end profit sharing

#INDJEFF]]> Mon, 03 Aug 2026 00:00:00 CDT 0 This person will work on-site at the company’ s office and collaborate closely with the owner, office manager, customers, and construction team to develop floor plans and formal construction drawings for custom homes and other residential building projects.The ideal candidate will have strong residential CAD experience, a solid understanding of home construction, and the ability to listen to a customer’ s ideas and translate them into practical designs. The company currently uses Chief Architect. Experience with Chief Architect is preferred, but candidates with strong residential CAD skills and the ability to learn new software will also be considered.
Primary Responsibilities

• Meet with customers to understand their ideas, needs, and design preferences.
• Create residential floor plans and formal construction drawings.
• Develop and revise plans using CAD design software.
• Work closely with the owner, office manager, customers, and construction team.
• Make plan revisions based on customer feedback and construction requirements.
• Help ensure designs are accurate, functional, and practical to build.
• Create and maintain organized plan files, revisions, and approvals.
• Assist with room layouts, exterior elevations, cabinetry, finishes, fixtures, and other design details as needed.
• Identify potential design or construction concerns before work begins.

Required Qualifications

• Previous experience creating residential home plans or construction drawings.
• Strong CAD drafting and design skills.
• Understanding of residential construction methods and plan requirements.
• Ability to turn customer ideas, sketches, and conversations into formal designs.
• Strong attention to detail and accuracy.
• Good communication and customer-service skills.
• Ability to manage revisions and collaborate with customers, office staff, and construction professionals.

Preferred Experience

• Experience using Chief Architect.
• Interior design or space-planning experience.
• Custom-home, barndominium, pole-barn home, or post-frame design experience.
• Experience creating floor plans, elevations, foundation plans, roof plans, or related construction documents.
• Familiarity with residential building codes and permitting requirements.

Position Details

• Monday - Thursday 8 am - 5 pm, Friday 8 am - 4 pm
• $30–$35/hr DOE
• Temp-to-Hire Opportunity

Weekly Pay and Benefits Available#INDJEFF]]> Mon, 03 Aug 2026 00:00:00 CDT 0 Responsibilities of the Snack Packer position

1. Packaging processed meat products including smoked hams, bacon, snack sticks, jerky and sausages.
2. Making sure the correct product is being processed
3. Using machinery such as wrapping machine 
4. Wrapping product securely according to company standards or requirements
5. Preparing product ready for shipping
6. Proper following of sanitation procedures
7. Maintaining and cleaning equipment and tools 

  Requirements for the Snack Packer position

1. Pre-employment paperwork required
2. Plant manufacturing or similar experience welcome but not required
3. Able to stand on hard ground for 8+ hours
4. Able to lift/move/carry 20-30 pounds continuously and occasionally 50 pounds
5. Able to work at required speeds

Benefits of the Snack Packer position

1. Weekly paychecks
2. Temp to hire
3. Medical/Dental/Vision/Life/Short Term Disability Insurance offered 
4. Paid Holidays
5. Paid Vacation

Shift Hours and Pay Rate  Mondays – Fridays   6: 00 AM - 3: 30 PM @ $16.50/hr  #INDJEFF]]> Mon, 03 Aug 2026 00:00:00 CDT 0

Operate production line machinery and perform product assembly.

Troubleshoot production equipment and resolve minor production issues.

Perform machine and equipment changeovers as needed.

Inspect parts and maintain quality standards by making machine adjustments when necessary.

Reject parts that do not meet specifications.

Follow Standard Operating Procedures (SOPs) and Job Safety Analysis (JSA).

Complete daily production and quality logs.

Perform preventative maintenance (PMs) on machinery.

Communicate with operators on other shifts regarding production and equipment.

Maintain a clean, organized, and safe work area.

Lock out and shut down equipment when required.

Assist maintenance technicians and manufacturing engineers as needed.

Help train new operators when requested.

Qualifications

• High school diploma or GED preferred.
• Basic reading, writing, and math skills.
• Previous manufacturing or machine operating experience is beneficial but willingness to learn is highly valued.
• Strong mechanical aptitude and manual dexterity.
• Ability to work independently and as part of a team.
• Strong attention to detail and commitment to quality.
• Ability to learn new equipment and manufacturing processes.

Physical Requirements

• Stand on concrete for 10-hour shifts.
• Frequently lift materials up to 50 pounds.
• Work in a manufacturing environment where temperatures may exceed 90° F.
• Wear required PPE, including steel-toe boots, safety glasses, and hearing protection.

#INDSXF]]> Fri, 31 Jul 2026 00:00:00 CDT 0

Routine heavy cleaning of floors 

Shampoo rugs 

Wash Walls and glass

Empty Trash 

Routine cleaning restrooms 

Restocking paper and soap supplies  

Will maintain custodial equipment. 

   Benefits of the Custodial  Starting pay $17.00.  Hours   Mon – Thurs 8 am- 4: 30 pmFriday 7: 30 am -4 pm  IMKO Pays Weekly on Fridays!
  IMKO offers Paid Holidays and Paid Vacation
  Apply online www.imko.com - Stop into the IMKO office between 9 AM - 3 PM
  If you have questions, please call us at 712-224-2480 #INDSCTY]]> Thu, 30 Jul 2026 00:00:00 CDT 0   IMKO is currently hiring Material Handler who can assist with a variety of materials, components, and products.   There will be a lot of shop work, there will be some forklift work and material handling.   Requirements of the Material Handler  

1. Highschool Diploma / Equivalent 
2. Collecting equipment and materials based on production requirements 
3. Use measuring tools 
4. Document appropriately 
5. Maintains a safe work area and upkeeps machines 
6. Use grinders and buffers to clean up a weld 
7. Operate forklifts and other materials to and from welding area 

   Benefits of the Material Handler  

1. Hours will be Mon – Fri 8 am – 4: 30 pm
2. Starting pay $18 - $ 20 DOE. 

  IMKO Pays Weekly on Fridays!
  IMKO Offers Paid Holidays and Paid VacationApply online www.imko.com - Stop into the IMKO office between 9 AM - 3 PM

  IMKO offers Medical Coverage - Access to affordable and comprehensive group medical coverage. If you have questions, please call us at 712-224-2480 #INDSCTY]]> Thu, 30 Jul 2026 00:00:00 CDT 0 Pay: $17.50
Primary Responsibilities

• Pull, pack, and ship customer orders.
• Create shipping documents in accordance with government regulations.
• Maintain accurate inventory by updating labels and verifying inventory counts.
• Respond quickly to urgent shipping requests.
• Receive, inspect, and organize incoming inventory.
• Prepare and package orders for shipment.
• Load and unload materials.
• Maintain a clean, organized, and safe warehouse.
• Work closely with team members to meet daily shipping goals.

Qualifications

• Previous warehouse experience preferred.
• Strong attention to detail.
• Basic computer skills (preferred).
• Ability to work in a team environment.
• Dependable with good organizational skills.
• Comfortable following established procedures and work instructions.

Work Environment

• Climate-controlled warehouse.
• Clean and brightly lit facility.
• Lightweight products rather than heavy industrial materials.
• Team-oriented culture with an emphasis on collaboration and having fun while maintaining productivity. 

#INDSXF]]> Thu, 30 Jul 2026 00:00:00 CDT 0
Laborer-Day Shift

Duties and Responsibilities:
*This is a non-exhaustive overview of the job duties for this position.
 Assist welders, fitters, and mechanics with railcar and fabrication shop tasks.
 Perform groundwork including coupling/uncoupling cars, and properly aligning switches.
 Complete pre- start up switch engine inspection and recognize problems and complete daily
checklist.
 Safely operate the switch engine including start-up/shut down.
 Perform basic switch engine maintenance (e.g., changing brake shoes, adjusting air brake
piston travel).
 Adhere to safety rules of switching outside and inside the shop.
 Assist with track maintenance (driving spikes, lubing switches, tighten joint bars, and
recognize needed track maintenance).
 Maintain an organized storage yard and safe work environment.
 Operate forklifts, overhead cranes, and hand tools safely.
 Perform general shop cleaning, material handling, and basic fabrication support (cutting,
grinding, drilling, prepping).
 Handle scrap, waste, and recyclable materials per company safety and environmental
guidelines.
 Work overtime as the need arises.
 Regular and consistent engagement, participation and promotion of Herzog’ s Culture and its
essential behaviors are a requirement for this position.
 Regular and predictable attendance and punctuality are a requirement for this position.
Must submit resume to lisaw@imko.com
#INDSTJO]]> Tue, 28 Jul 2026 00:00:00 CDT 0
Duties and Responsibilities:
*This is a non-exhaustive overview of the job duties for this position.
 Be able to demonstrate the skills to pass an AWS D15.1 welding certification test within 30
calendar days of employment using E 71 Ti Flux Core wire and Co2 for a shielding gas.
 Must be able to perform some general repairs aided by a more skilled carmen/ welder.
 Jack cars, dissemble truck components and reassemble in a timely and safe manner.
 Remove and reassemble raft components in a timely and safe manner.
 Operate an air arc and plasma cutter.
 Must come to work and be efficient, quality minded and very safety driven.
 Positive Attitude.
 Regular and consistent engagement, participation and promotion of Herzog’ s Culture and its
essential behaviors are a requirement for this position.
 Regular and Predictable attendance and punctuality are a requirement for this position.
 Must be experienced in FCAW process, 2G, 3G, and 4G positions
 Must be able to pass AWS D15.1 weld test
 Must be able to work at heights up to 16’ and in small tight places
 Knowledge of safe work practices and prior experience fitting metal is a plus
Must submit resume to lisaw@imko.com
#INDSTJO
]]> Tue, 28 Jul 2026 00:00:00 CDT 0
• Specializes in various types of saws and iron workers machine operations.
• Complicated set-ups with a high degree of accuracy, setting up machine tool(s), adjusting
guides and stops, working tables and other controls to handle the size of stock to be
sawed, determine proper feeds, speeds, tooling and operation sequence and select those
prescribed in drawings, blueprints, or layouts.
• Use a variety of precision measuring instruments, making necessary adjustments during
operation to achieve requisite dimensions within tolerance.
• Know and follows all safety instructions and guidelines.
• Keeps area and equipment clean and free of debris.
• Frequently uses overhead crane.
• Uses grinder to smooth out burrs.
• Examine products or work to verify conformance to specifications.
• Attach or mark identification onto products.
• Other job functions may be required.
Must submit resume to lisaw@imko.com
#indstjo]]> Tue, 28 Jul 2026 00:00:00 CDT 0 Brake Press Operator
$19.00-$20.00/hour DOE | Monday-Friday | 7: 00 AM-3: 30 PM | Weekly Pay
Looking for a stable manufacturing career with competitive pay and opportunities to grow your skills? IMKO Workforce Solutions is hiring an experienced Brake Press Operator for a well-established fabrication company in St. Joseph, MO. If you have press brake experience, enjoy precision work, and take pride in producing quality parts, we' d love to hear from you.What You' ll Do

• Operate CNC press brake equipment to produce precision metal parts
• Read and interpret blueprints and work instructions
• Set up and adjust press brake machines for production runs
• Inspect finished parts to ensure they meet quality standards and specifications
• Monitor production to maintain accuracy and efficiency
• Maintain a clean, safe, and organized work area
• Follow all company safety procedures
• Assist with other production duties as needed

What We' re Looking For

• Previous press brake experience is required
• Ability to read and interpret blueprints
• Strong attention to detail and commitment to quality
• Ability to lift up to 50 pounds
• Ability to stand, bend, and perform repetitive tasks throughout the shift
• Reliable attendance and strong work ethic

Why You' ll Love This Opportunity

• Starting pay of $20.00/hour
• Monday-Friday schedule
• 7: 00 AM-3: 30 PM shift
• Opportunity for overtime
• Weekly pay
• Paid vacation
• Paid holidays
• Health, dental, life, short-term disability, and long-term disability insurance
• Background-friendly employer
• Stable, team-oriented fabrication environment

Apply Today
Ready to put your brake press experience to work with a great local employer?Submit your resume to lisaw@imko.com to be considered.
#INDSTJO]]> Tue, 28 Jul 2026 00:00:00 CDT 0 Production Associate – Powder Coat
1st Shift (7: 00 AM– 3: 30 PM) Monday-Friday & 3rd Shift (10: 00 PM– 6: 00 AM) Sunday-Thursday Available
Pay: $19.00/hour | Weekly Pay | Overtime Opportunities
Looking for a stable manufacturing job with steady hours and excellent benefits? IMKO Workforce Solutions is hiring Production Associates for a growing fabrication company in St. Joseph, MO. This is a great opportunity for someone looking to start or grow a career in manufacturing— no powder coating experience is required.
What You' ll Do

• Hang metal parts on the powder coat line before the coating process
• Remove finished parts from the line after coating
• Sort finished products onto racks for the next stage of production
• Inspect parts for quality and proper finish
• Maintain a clean and organized work area
• Follow all company safety procedures
• Assist with other production duties as needed

Qualifications

• Ability to lift up to 50 pounds
• Ability to stand and perform repetitive work throughout the shift
• Previous manufacturing or paint experience is helpful but not required
• Strong attention to detail
• Reliable attendance and dependable work ethic
• Ability to follow written and verbal instructions

Why You' ll Love This Opportunity

• $19.00/hour starting pay
• 1st & 3rd shifts available
• Opportunity for overtime
• Weekly pay
• Paid holidays
• Paid vacation
• Health, dental, life, short-term disability, and long-term disability insurance
• Background-friendly employer
• Entry-level position with on-the-job training

Apply Today
Ready to get started? Submit your resume to lisaw@imko.com to be considered.
#INDSTJO]]> Tue, 28 Jul 2026 00:00:00 CDT 0 Welder-St. Joseph, MO1st Shift$24.68/hr
Duties:Welds using M-I-G processes2)       Demonstrated ability to burn using a hand torch3)       Demonstrated ability to read blueprints4)       Determines critical dimensions and tolerances using measuring tools5)       Read and comprehend blueprints and process routings

1. Demonstrated ability to follow established safety and quality procedures.
2. Team concept – be flexible to move from job to job to support the schedule

Requirements:High School Diploma or equivalent3-5 Years Welding Experience
Contact Natalie at 816-233-4040 for more details
#INDSTJO

]]> Thu, 23 Jul 2026 00:00:00 CDT 0 About the Role

We are seeking a detail-oriented and reliable  Accounting Clerk  specializing in Accounts Payable to join our team. In this role, you will provide critical support to our accounting department, manage AP processes, and ensure smooth financial data entry into our general ledger system.

Key Responsibilities

• Accounts Payable Management:  Perform daily accounting and clerical functions supporting AP.
• Invoice & PO Handling:  Open mail, sort invoices, and match invoices with purchase order receivers before entering them into the system.
• Digital Retrieval:  Download vendor invoices and files directly from vendor portals and websites.
• General Ledger Entry:  Key daily worksheets into the general ledger system and perform daily AP GL reconciliations.
• Vendor Support:  Research, track, and resolve any vendor billing inquiries or discrepancies.
• Check Processing:  Prepare weekly check write reports for supervisor approval and process check runs (weekly/daily as needed).
• Team Assistance:  Provide additional administrative and accounting support to team members and management as needed.

Qualifications & Skills

• Experience:  Prior accounting experience in Accounts Payable (AP) and/or Accounts Receivable (AR).
• Software & Tech:  Proficient in MS Excel and MS Word; general PC proficiency and typing skills.
• Key Skills:  High attention to detail, organization, reporting skills, and familiarity with financial software.
• Soft Skills:  Excellent verbal and written communication skills; self-starter capable of following written procedures independently.
• Physical Requirements:  Ability to lift up to 20 lbs; position requires a combination of sitting and standing to perform job functions.

Benefits:

• Dental insurance
• Health insurance
• Paid time off
• Vision insurance

Work Location: In person
]]> Thu, 23 Jul 2026 00:00:00 CDT 0 IMKO Workforce Solutions is currently hiring Valve Technicians for a leading rail services company in the Kansas City area. If you have mechanical aptitude, enjoy hands-on work, and are looking for a stable career in the rail industry, this is a great opportunity to join a safety-focused team.
Job Responsibilities

• Read and interpret work orders to remove, inspect, repair, and reinstall tank car product and pressure relief valves.
• Tag and identify valves for proper tracking and reinstallation.
• Perform repairs according to industry regulations and customer specifications.
• Conduct valve testing and accurately document maintenance records, test results, materials used, and repairs completed.
• Inspect valves for defects, pressure loss, and proper operation.
• Notify supervisors of equipment or material needs to complete assigned work.
• Work effectively with team members to complete jobs safely and efficiently.
• Maintain a clean and organized work environment.
• Follow all company safety, environmental, quality, and regulatory procedures.
• Complete additional duties and special projects as assigned.

Qualifications

• Ability to read, write, and communicate effectively in English.
• Willingness to learn job-specific procedures and successfully complete required training.
• Strong attention to detail and ability to follow written and verbal instructions.
• Comfortable working outdoors year-round in all weather conditions.
• Ability to safely work around heavy equipment, railroad tracks, and on, under, and inside railcars.
• Mechanical aptitude and experience using hand and power tools is preferred.
• Ability to prioritize multiple tasks while maintaining quality workmanship.
• Must be able to wear required Personal Protective Equipment (PPE), including steel-toe boots, safety glasses, hearing protection, gloves, and other required safety gear.

Physical RequirementsThis position involves heavy, hands-on mechanical work performed both indoors and outdoors. Employees regularly work in hot, cold, wet, dusty, and confined environments while around moving equipment and railcars.Qualified candidates should be able to:

• Lift, push, pull, bend, stoop, kneel, crouch, climb, and reach throughout the workday.
• Work on top of, underneath, and inside railcars.
• Work safely in confined spaces and at varying heights.
• Use proper lifting techniques and mechanical lifting equipment when necessary.
• Safely operate hand tools, air tools, power tools, grinders, impact wrenches, jacks, cutting torches, and other shop equipment.

Why Work with IMKO Workforce Solutions?

• Competitive pay
• Full-time opportunity
• Hands-on mechanical work
• Opportunity to develop specialized rail industry skills
• Safety-focused work environment
• Weekly pay

Apply today with IMKO Workforce Solutions and start building a rewarding career in the rail industry!
#INDKC]]> Thu, 23 Jul 2026 00:00:00 CDT 0

Inbound/Outbound Calls

Greet guests as they enter their facility.

Data Entry

Assisting Customers with sales of awards, banners, signage, t shirts, jackets, polos and more.    

Answer questions, resolve customer concerns.

Call Customer when orders are ready for pick up. 

Typing orders.     

Requirements of the Customer Service Representative  

1. Microsoft Word / Excel Skills/ QuickBooks
2. Customer Service skills 
3. Work under pressure to meet tight deadlines. 
4. Attention to detail.
5. Time management skills 

  Benefits Available and reviewed after 90 days.Paid Breaks, Overtime available.What you make as a Customer Service Representative:   Starting pay $14 -$15  The hours for the Customer Service Representative will be Mon-Fri 8a-5p with OT as needed.  IMKO Pays Weekly on Fridays!
  IMKO offers Paid Holidays and Paid VacationApply online www.imko.com - Stop into the IMKO office between 9 AM - 3 PM
  IMKO offers Medical Coverage - Access to affordable and comprehensive group medical coverage. If you have questions, please call us at 712-224-2480#INDSCTY]]> Wed, 22 Jul 2026 00:00:00 CDT 0 IMKO Workforce Solutions is the exclusive hiring partner for Adams Thermal Systems, and we' re looking for dependable, hardworking individuals ready to build a career in manufacturing!
What You' ll Do

• Operate production equipment and assemble quality products.
• Inspect parts and ensure products meet quality standards.
• Perform basic machine changeovers and preventative maintenance.
• Troubleshoot minor equipment issues.
• Keep your work area clean and safe.
• Work with your team to keep production running efficiently.

What We' re Looking For

• Manufacturing experience is a plus, but we' re willing to train motivated individuals.
• Strong work ethic and reliable attendance.
• Ability to lift up to 50 lbs.
• Willingness to learn and work in a fast-paced environment.
• Basic reading and math skills.

Shift Options1st Shift

• Monday– Thursday | 5: 00 AM – 3: 00 PM
• Overtime Fridays | 5: 00 AM – 1: 00 PM

2nd Shift

• Monday– Thursday | 3: 00 PM – 1: 00 AM
• Overtime Fridays | 1: 00 PM – 9: 00 PM

Before You Start

• ✔ Two forms of valid ID required for employment eligibility.
• ✔ Must successfully pass a pre-employment background check.

Why Adams Thermal?

• Starting pay of $20.00/hour
• Gas Incentive
• Four-day work week
• Overtime opportunities
• Long-term career growth
• Clean, team-oriented manufacturing environment

#INDSXF]]> Tue, 21 Jul 2026 00:00:00 CDT 0 Responsibilities

• Perform preventative and corrective maintenance on facility systems and equipment.
• Maintain and repair building systems including HVAC, plumbing, lighting, doors, and other facility infrastructure.
• Troubleshoot mechanical, electrical, pneumatic, and hydraulic issues affecting facility operations.
• Perform routine inspections of facility equipment to identify maintenance needs and safety concerns.
• Assist with installation, relocation, and setup of equipment, machinery, and facility improvements.
• Coordinate with maintenance personnel and outside contractors to complete repairs and projects.
• Complete work orders and maintain accurate maintenance documentation.
• Operate hand tools, power tools, forklifts, lifts, and other maintenance equipment safely.
• Support preventative maintenance programs to minimize downtime and extend equipment life.
• Maintain a clean, organized, and safe work environment while following all company safety policies and PPE requirements.
• Assist with snow removal, grounds maintenance, and other facility-related duties as needed.
• Respond to maintenance emergencies and prioritize repairs to minimize disruptions to production.

Qualifications

• Previous experience in facility maintenance, industrial maintenance, or building maintenance preferred.
• Strong mechanical aptitude with experience troubleshooting building and facility systems.
• Working knowledge of HVAC, plumbing, electrical, hydraulic, and pneumatic systems.
• Experience using hand tools, power tools, and maintenance equipment.
• Ability to read and interpret maintenance manuals, blueprints, or technical drawings.
• Strong problem-solving and troubleshooting skills.
• Ability to work independently with minimal supervision while collaborating effectively with team members.
• Excellent organizational and communication skills.
• Basic computer skills for work orders and maintenance documentation.
• Valid driver' s license preferred.

Preferred Qualifications

• Experience in a manufacturing or industrial environment.
• Welding or fabrication experience.
• Forklift certification or ability to become certified.
• Experience with preventative maintenance programs and CMMS software.
• General knowledge of utility systems, including compressed air, HVAC, water, and electrical distribution.

Physical Requirements

• Ability to stand, walk, bend, kneel, climb ladders, and work in confined spaces for extended periods.
• Frequently lift and move up to 50 pounds.
• Ability to work indoors and outdoors in varying weather conditions.
• Comfortable working around moving machinery, loud environments, and manufacturing equipment while wearing required PPE.

#INDSXF]]> Mon, 20 Jul 2026 00:00:00 CDT 0 IMKO Workforce Solutions is  URGENTLY  looking for qualified candidates for Machine Operators! Both day-time and night-time shifts available!

Key Responsibilities & Duties:   Hiring for all 3 shift.   1st/2nd/3rd
* Operate machines safely and efficiently
* Read and Understand Machine Instructions
* Perform as an active/ contributing team member by supporting and performing all the tasks
* Ability to work independently and overtime as needed
* Frequently lift/carry up to 60lbs
* Be on your feet up to 8 hours
* Demonstrate a commitment to the companies policies and values!

Employee Benefits:
* Vacation Pay (must meet eligibility requirements)
* Holiday Pay (must meet eligibility requirements)
* Health, Dental and Vision Insurance!
* Pay increase once hired on! Great Career Advancement!
* Weekly Pay
* Overtime Available
For more information on this opening please call 402 805 4373 or stop into the office at 3302 O Street to apply today!
#INDLIN]]> Fri, 17 Jul 2026 00:00:00 CDT 0

Operating and maintaining machinery and production line equipment.

  Monitoring products and removing faulty products.

  Following and enforcing strict safety regulations and guidelines.

Reporting any issues or malfunctions to supervisors.

  Ensuring the workspace is clean and organized.

  Keeping track of inventory and ordering materials as needed.

  Inspecting products for defects and reporting any production issues to the supervisor.

What you will make as a Production Associate   all shifts is   GREAT PAY! IMKO Pays Weekly on Fridays! IMKO offers Paid Holidays and Paid VacationGreat Pay plus differential pay on shifts Apply online www.imko.com - Stop into the IMKO office between 9 AM - 3 PMIMKO offers Medical Coverage - Access to affordable and comprehensive group medical coverage. If you have questions, please call us at 402-805-4373.IMKO Workforce Solutions is an Equal Opportunity Employer. IMKO Workforce Solutions conducts all employment practices without regard to race, sex, color, religion, national origin, age, disability, protected veteran' s status, pregnancy, genetic information, sexual orientation or any other basis prohibited by law.#INDLIN
]]> Fri, 17 Jul 2026 00:00:00 CDT 0 Responsibilities

• Perform preventative maintenance on production equipment and facility machinery.
• Troubleshoot and repair mechanical, electrical, hydraulic, pneumatic, and PLC-controlled equipment.
• Respond quickly to equipment breakdowns to minimize production downtime.
• Inspect, diagnose, and repair industrial machinery to ensure safe and efficient operation.
• Perform welding, fabrication, and equipment modifications as needed.
• Complete maintenance work orders and maintain accurate maintenance records using the CMMS system.
• Install, adjust, and maintain production equipment and support systems.
• Assist with equipment upgrades, installations, and continuous improvement projects.
• Work closely with production, engineering, and quality teams to maximize equipment performance.
• Maintain a clean and organized maintenance shop and work area.
• Follow all company safety policies, including Lockout/Tagout (LOTO) procedures and proper PPE usage.
• Train and assist production employees with proper equipment operation when necessary.

Qualifications

• Previous industrial maintenance experience required.
• Strong mechanical, electrical, hydraulic, and pneumatic troubleshooting skills.
• Experience with PLCs, motors, conveyors, pumps, and industrial production equipment preferred.
• Welding and fabrication experience preferred.
• Ability to read blueprints, electrical schematics, and technical manuals.
• Experience using computerized maintenance management systems (CMMS) is a plus.
• Strong problem-solving skills and ability to work independently.
• Excellent communication and teamwork skills.
• Reliable attendance and willingness to work overtime as needed.
• Ability to lift up to 70 pounds and work in varying temperatures within a manufacturing environment.

Pay & Schedule

• Starting at $27.00+ per hour, based on experience and qualifications.
• Full-time position.
• 2nd shift (3PM-1AM) Shift deferential in pay as well

#INDSXF]]> Fri, 17 Jul 2026 00:00:00 CDT 0
Requirements/other duties:
-Manage to build a pick orders-Build verticle lines-Fulfill orders for vendors to pick up -Clean and organize work envoiorment -Ensure orders are accurate -Perform duties that are necessary -Pallet jack experience is a plus  -Proper lifting techniques 
Experience/abilities:
- Experience in a production environment preferred
- Ability to lift and carry 40 pounds
- Ability to stand for an entire 8-10 hour shift
- Continuous use and movement of hands, wrists, and upper body
- Good eyesight with or without corrective lenses

IMKO Workforce Solutions is an Equal Opportunity Employer. IMKO Workforce Solutions conducts all employment practices without regard to race, sex, color, religion, national origin, age, disability, protected veteran' s status, pregnancy, genetic information, sexual orientation or any other basis prohibited by law.
#INDLIN]]> Fri, 17 Jul 2026 00:00:00 CDT 0

Safely operate drag-line pumping systems, tank spreaders, and other agricultural equipment.

Transport, inject, and spread manure according to field maps and application requirements.

Assist with preventative maintenance and minor repairs on pumps, belts, chains, bearings, and other equipment.

Troubleshoot basic mechanical issues to minimize downtime.

Monitor equipment performance and report repair needs.

Maintain accurate records of equipment run times, manure application rates, and daily activities.

Prepare documentation for environmental and regulatory compliance, including DNR audits.

Manage manure storage areas, including stacking, composting, and inventory of materials.

Work closely with team members to complete daily field operations safely and efficiently.

Follow all safety procedures and environmental regulations.

Perform additional agricultural and equipment-related duties as assigned.

Qualifications

• Previous agricultural, farming, heavy equipment, or manure handling experience preferred.
• Experience operating heavy machinery is strongly preferred.
• Strong mechanical aptitude with the ability to perform basic equipment maintenance and repairs.
• Basic math skills required for measuring, tracking application rates, and maintaining records.
• Ability to read field maps and follow detailed instructions.
• Strong attention to detail and commitment to safety.
• Reliable, self-motivated, and able to work independently or as part of a team.
• Valid driver' s license required (CDL is a plus).
• Ability to work outdoors in a variety of weather conditions.
• Ability to lift up to 75 pounds and perform physically demanding work.

Pay & Schedule

• $22.00–$35.00 per hour, based on experience and skills.
• Full-time position.
• Long workdays are common, especially during peak application seasons. Flexibility with hours is required.

Benefits

• Competitive pay based on experience
• Health, Dental, and Vision Insurance
• Paid Time Off and Holiday Pay
• 401(k) with Company Match
• Opportunities for advancement and skill development
• Stable, long-term employment

#INDSXF]]> Fri, 17 Jul 2026 00:00:00 CDT 0 The Accounting and Purchasing Coordinator is responsible for the following. * Preparing and filing for sales and use tax returns in a timely and accurate manner. *Provide support to the accounting team by assisting with various administrative and financial tasks as needed. *Responsible for managing the company' s purchasing activities by sourcing materials and services, processing purchase orders, and maintaining strong vendor  relationships. *Ensures timely procurement of quality products at competitive prices while supporting operational needs and maintaining accurate purchasing records. *The ideal candidate is detailed-oriented, organized, and able to manage multiple responsibilities while maintaining accuracy and confidentiality.

Key Responsibilities:
  1.Prepare and file sales tax returns, along with other required state filings, on a monthly and annual basis  2.Support the Accounts Receivable Clerk with deposits, invoices and other related duties as needed.  3.Audit and reconcile account discrepancies to support accurate month-end reporting.  4.Assist with collection efforts on past-due accounts while maintaining positive and professional customer relationships  5.Resolve purchasing discrepancies, including pricing, receiving and invoicing issues.
 Skills for Success:  1.Must be reliable and extremely trustworthy  2.Able to learn other accounting software systems  3.Excellent organizational skills and attention to detail  4.Ability to maintain confidential and meticulous records  5.Prior accounting experience preferred  6.Associate or Bachelor degree in Accounting or a related field preferred but not required.
Perks of   the job:  Fun and relaxed environment with flexible work schedule M - F  Medical, vision and dental  401KExcellent PTO 

#INDSTJ

]]> Fri, 17 Jul 2026 00:00:00 CDT 0 Responsible for removing and organizing parts from steel sheets.  Essential Duties:   Essential job duties for this position include the following items. ▪ Safely remove parts from steel sheets.▪ Stack and organize parts for the next operations. ▪ Use hand tools to remove any tabbing or scale. ▪ Analyze each piece for surface quality defects. ▪ Accurately record completed work on computer.
The requirements listed below are representative of the minimum knowledge, skills and ability required.   Education/Experience: ▪ High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. Language Skills: ▪ Ability to read and comprehend simple instructions, short correspondence, and memos. ▪ Ability to write simple correspondence. ▪ Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Mathematical Skills: ▪ Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. ▪ Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Reasoning Ability:▪ Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions.

IMKO Pays Weekly on Fridays! IMKO offers Paid Holidays and Paid VacationGreat Pay plus differential pay on shifts Apply online www.imko.com - Stop into the IMKO office between 9 AM - 3 PMIMKO offers Medical Coverage - Access to affordable and comprehensive group medical coverage. If you have questions, please call us at 402-805-4373.
IMKO Workforce Solutions is an Equal Opportunity Employer. IMKO Workforce Solutions conducts all employment practices without regard to race, sex, color, religion, national origin, age, disability, protected veteran' s status, pregnancy, genetic information, sexual orientation or any other basis prohibited by law.
#INDLIN
]]> Fri, 17 Jul 2026 00:00:00 CDT 0
Key Responsibilities & Duties:
* Operate machines safely and efficiently
* Read and Understand Machine Instructions
* Perform as an active/ contributing team member by supporting and performing all the tasks
* Ability to work independently and overtime as needed
* Frequently lift/carry up to 75lbs
* Be on your feet up to 8 hours
* Demonstrate a commitment to the companies policies and values!

Employee Benefits:
* Vacation Pay (must meet eligibility requirements)
* Holiday Pay (must meet eligibility requirements)
* Health, Dental and Vision Insurance!
* Pay increase once hired on! Great Career Advancement!
* Weekly Pay
* Overtime Available
For more information on this opening please call 402 805 4373 or stop into the office at 3302 O Street to apply today!
#INDLIN]]> Fri, 17 Jul 2026 00:00:00 CDT 0

Produces components by assembling parts and subassemblies.

Reads and deciphers schematics, blueprints, and assembly instructions.

Positions or aligns components and parts, either manually or with hoists.

Uses hand tools or machines to assemble parts.

Conducts quality control checks.

Cleans and maintains work area and equipment, including tools.

Prepares work to be accomplished by studying parts lists and gathering parts, subassemblies, tools, and materials.

Positions parts and subassemblies by using templates or reading measurements.

Assembles components by examining connections for correct fit, fastening parts and subassemblies.

Verifies specifications by measuring completed component.

Resolves assembly problems by altering dimensions to meet specifications; notifying supervisor to obtain additional resources.

Keeps equipment operational by completing preventive maintenance requirements, following manufacturer’ s instructions, troubleshooting malfunctions, and calling for repairs.

Maintains a safe and clean working environment by complying with procedures, rules, and regulations.

Maintains inventory by checking stock to determine supply levels, placing and tracking orders, and verifying receipt of supplies.

Conserves resources by using equipment and supplies as needed to accomplish job results.

Documents actions by completing production and quality forms.

  Assembler Skills/Qualifications:

• Mechanical and technical skills
• Physical stamina and strength
• Safety management mindset
• Focus on quality control
• Dexterity and hand-eye coordination, including the ability to grasp, manipulate, and assemble parts and components that are often very small

  Education, Experience, & Licensing Requirements:

• High school diploma or GED preferred
• Previous manufacturing experience

]]> Thu, 16 Jul 2026 00:00:00 CDT 0 Overview

We are seeking a dedicated and reliable General Laborer to join our team. This role involves performing a variety of physical tasks to support manufacturing, construction, or maintenance operations. The ideal candidate will demonstrate strong mechanical knowledge, adhere strictly to safety standards, and be capable of handling heavy lifting and manual labor with efficiency. This position offers an excellent opportunity for individuals seeking hands-on work in a dynamic environment committed to quality and safety.

Duties

• Assist in the assembly, disassembly, and maintenance of equipment and machinery.
• Perform general site cleanup, including debris removal and organizing work areas.
• Support manufacturing processes by loading, unloading, and moving materials.
• Follow safety protocols diligently, including the proper use of personal protective equipment (PPE).
• Conduct routine inspections of tools and equipment to ensure proper functioning.
• Operate basic machinery or hand tools as required, adhering to safety standards.
• Assist with inventory management by organizing supplies and reporting shortages.
• Participate in safety training sessions and contribute to maintaining a safe work environment.
• Support team members in completing daily operational tasks efficiently.

Experience

• Prior experience in manufacturing, construction, or related manual labor roles is preferred.
• Demonstrated mechanical knowledge relevant to machinery operation or maintenance.
• Familiarity with safety standards in production environments, including GMP (Good Manufacturing Practices).
• Ability to perform heavy lifting safely and consistently over extended periods.
• Knowledge of PPE requirements and proper usage during various tasks.
• Strong physical stamina and the ability to work in diverse environmental conditions.
• Good communication skills and the ability to follow detailed instructions accurately.
• Must be able to lift up to 50 lbs on a regular basis throughout the day.

This position is vital for maintaining smooth operations within our facility. We welcome motivated individuals eager to contribute their skills in a fast-paced, safety-conscious environment.

Benefits:

• Dental insurance
• Health insurance
• Life insurance
• Vision insurance

]]> Thu, 16 Jul 2026 00:00:00 CDT 0
Job Summary:  A Manufacturing & Production Worker creates, builds, assembles, and verifies factory items.

Hours:  6AM-2PM Monday-Friday. Overtime as required.

Duties:  Create or assemble finished products through the use of various tools or machinery. They are part of an assembly line of workers, each with specific roles in the production process. 

Here are some of the day-to-day tasks:

• Operate and maintain manufacturing equipment.
• Assemble products according to specifications.
• Perform quality control checks on finished products.
• Follow safety protocols and procedures.
• Maintain a clean and organized work area.
• Report any equipment malfunctions or safety concerns.
• Collaborate with team members to meet production goals.
• Participate in continuous improvement initiatives.
• Assist with inventory management and material handling.
• Ensure compliance with company policies and regulations.
• Monitor production processes for efficiency and accuracy.
• Adhere to production schedules and deadlines.
• Communicate effectively with supervisors and team members.
• Follow detailed work instructions and blueprints.
• Participate in safety and training programs.
• Contribute to a positive and productive work environment.

Qualifications:

Any prior experience in factory work is an asset for a Manufacturing & Production Worker. They will learn on-the-job, but practical experience using tools or machinery, or working as part of a production line, will prepare the applicant for the role. General laborers already have a basic understanding of how to manage the workflow.

• High school diploma or equivalent required
• Previous experience in a manufacturing environment preferred.
• Ability to operate and maintain manufacturing equipment.
• Strong attention to detail and accuracy.
• Excellent problem-solving skills.
• Ability to follow instructions and work independently.
• Good communication and teamwork skills.
• Basic math and computer skills.
• Physical ability to lift and move heavy objects.
• Willingness to work flexible hours, including overtime.
• Commitment to safety and quality standards.
• Ability to read and interpret technical documents.
• Strong organizational and time management skills.
• Ability to work in a fast-paced environment.
• Reliable transportation to and from work.
• Willingness to participate in training and development programs.
• Ability to stand for long periods of time.
• Knowledge of lean manufacturing principles is a plus.
• Ability to adapt to changing production demands.
• Positive attitude and strong work ethic.

If you are a dedicated professional with a passion for manufacturing excellence, we invite you to apply with us.

Job Type: Full-time

Benefits:

• Dental insurance
• Health insurance
• Life insurance
• Vision insurance

Education:

• High school or equivalent (Required)

Work Location: In person Sedalia, MO
]]> Thu, 16 Jul 2026 00:00:00 CDT 0 Responsibilities

• Operate manufacturing equipment according to production specifications and work instructions.
• Set up, monitor, and make basic adjustments to machines to ensure efficient operation.
• Perform routine quality inspections and verify products meet company standards.
• Troubleshoot minor machine issues and communicate larger concerns to maintenance or supervisors.
• Load raw materials and remove finished products from production equipment.
• Read and follow blueprints, work orders, and production documentation.
• Record production data and maintain accurate documentation.
• Keep equipment and work areas clean, organized, and safe.
• Work closely with production, quality, and maintenance teams to meet daily production goals.
• Follow all company safety policies and standard operating procedures.
• Assist with additional manufacturing duties as assigned.

Qualifications

• Previous machine operating or manufacturing experience preferred.
• Mechanical aptitude with the ability to learn new equipment and processes.
• Experience using hand tools, measuring devices, or reading blueprints is a plus.
• Strong attention to detail and commitment to producing quality products.
• Ability to troubleshoot basic machine issues.
• Reliable attendance and strong work ethic.
• Ability to work independently and as part of a team.
• Comfortable working in a fast-paced manufacturing environment.
• Ability to lift up to 50 pounds and stand, bend, and move throughout the shift.

#INDSXF]]> Thu, 16 Jul 2026 00:00:00 CDT 0 Responsibilities

• Receive, inspect, and organize incoming materials and inventory.
• Pick, pack, and prepare customer orders for shipment.
• Load and unload trucks using forklifts, pallet jacks, or other material handling equipment.
• Accurately move materials throughout the warehouse and production areas.
• Maintain inventory accuracy through proper storage and organization.
• Perform routine cycle counts and assist with inventory audits.
• Inspect materials for damage and report discrepancies.
• Follow shipping and receiving procedures to ensure timely deliveries.
• Maintain a clean, organized, and safe warehouse environment.
• Assist production teams with material movement and other warehouse-related tasks as needed.
• Follow all company safety policies and procedures.

Qualifications

• Previous warehouse or manufacturing experience preferred.
• Forklift experience or certification is preferred.
• Strong attention to detail and organizational skills.
• Ability to work independently and as part of a team.
• Basic computer and inventory tracking experience is a plus.
• Reliable attendance and a strong work ethic.
• Ability to lift up to 50 pounds and stand, bend, and move throughout the shift.
• Comfortable working in a fast-paced industrial environment.

#INDSXF]]> Thu, 16 Jul 2026 00:00:00 CDT 0
Job Summary: A Manufacturing & Production Worker creates, builds, assembles, and verifies factory items.

Hours:  10PM - 6AM PM Sunday night - Thursday night, Overtime as required.

Duties: Create or assemble finished products through the use of various tools or machinery. They are part of an assembly line of workers, each with specific roles in the production process. Here are some of the day-to-day tasks:

• Operate and maintain manufacturing equipment.
• Assemble products according to specifications.
• Perform quality control checks on finished products.
• Follow safety protocols and procedures.
• Maintain a clean and organized work area.
• Report any equipment malfunctions or safety concerns.
• Collaborate with team members to meet production goals.
• Participate in continuous improvement initiatives.
• Assist with inventory management and material handling.
• Ensure compliance with company policies and regulations.
• Monitor production processes for efficiency and accuracy.
• Adhere to production schedules and deadlines.
• Communicate effectively with supervisors and team members.
• Follow detailed work instructions and blueprints.
• Participate in safety and training programs.
• Contribute to a positive and productive work environment.

Qualifications:

Any prior experience in factory work is an asset for a Manufacturing & Production Worker. They will learn on-the-job, but practical experience using tools or machinery, or working as part of a production line, will prepare the applicant for the role. General laborers already have a basic understanding of how to manage the workflow.

• High school diploma or equivalent required
• Previous experience in a manufacturing environment preferred.
• Ability to operate and maintain manufacturing equipment.
• Strong attention to detail and accuracy.
• Excellent problem-solving skills.
• Ability to follow instructions and work independently.
• Good communication and teamwork skills.
• Basic math and computer skills.
• Physical ability to lift and move heavy objects.
• Willingness to work flexible hours, including overtime.
• Commitment to safety and quality standards.
• Ability to read and interpret technical documents.
• Strong organizational and time management skills.
• Ability to work in a fast-paced environment.
• Reliable transportation to and from work.
• Willingness to participate in training and development programs.
• Ability to stand for long periods of time.
• Knowledge of lean manufacturing principles is a plus.
• Ability to adapt to changing production demands.
• Positive attitude and strong work ethic.

If you are a dedicated professional with a passion for manufacturing excellence, we invite you to apply with us.

Job Type: Full-time

Benefits:

• Dental insurance
• Health insurance
• Life insurance
• Vision insurance

Education:

• High school or equivalent (Required)

]]> Thu, 16 Jul 2026 00:00:00 CDT 0
Job Summary:  A Manufacturing & Production Worker creates, builds, assembles, and verifies factory items.

Hours:  2PM-10PM Monday-Friday. Overtime as required.

Duties:  Create or assemble finished products through the use of various tools or machinery. They are part of an assembly line of workers, each with specific roles in the production process. 

Here are some of the day-to-day tasks:

• Operate and maintain manufacturing equipment.
• Assemble products according to specifications.
• Perform quality control checks on finished products.
• Follow safety protocols and procedures.
• Maintain a clean and organized work area.
• Report any equipment malfunctions or safety concerns.
• Collaborate with team members to meet production goals.
• Participate in continuous improvement initiatives.
• Assist with inventory management and material handling.
• Ensure compliance with company policies and regulations.
• Monitor production processes for efficiency and accuracy.
• Adhere to production schedules and deadlines.
• Communicate effectively with supervisors and team members.
• Follow detailed work instructions and blueprints.
• Participate in safety and training programs.
• Contribute to a positive and productive work environment.

Qualifications:

Any prior experience in factory work is an asset for a Manufacturing & Production Worker. They will learn on-the-job, but practical experience using tools or machinery, or working as part of a production line, will prepare the applicant for the role. General laborers already have a basic understanding of how to manage the workflow.

• High school diploma or equivalent required
• Previous experience in a manufacturing environment preferred.
• Ability to operate and maintain manufacturing equipment.
• Strong attention to detail and accuracy.
• Excellent problem-solving skills.
• Ability to follow instructions and work independently.
• Good communication and teamwork skills.
• Basic math and computer skills.
• Physical ability to lift and move heavy objects.
• Willingness to work flexible hours, including overtime.
• Commitment to safety and quality standards.
• Ability to read and interpret technical documents.
• Strong organizational and time management skills.
• Ability to work in a fast-paced environment.
• Reliable transportation to and from work.
• Willingness to participate in training and development programs.
• Ability to stand for long periods of time.
• Knowledge of lean manufacturing principles is a plus.
• Ability to adapt to changing production demands.
• Positive attitude and strong work ethic.

If you are a dedicated professional with a passion for manufacturing excellence, we invite you to apply with us.

Job Type: Full-time

Benefits:

• Dental insurance
• Health insurance
• Life insurance
• Vision insurance

Education:

• High school or equivalent (Required)

Work Location: In person Sedalia, MO
]]> Thu, 16 Jul 2026 00:00:00 CDT 0

Works with confidential data. 

Post adjustments to General Ledger.

Create financial statements that include balance sheets, profit loss report and cash flow report.

Prepares financial tax asset detail reports and other detailed analyses.

Prepares monthly deprecation reports, month ending reports for sales, account payable, account receivable, inventory and production.

Analyze weekly sales reports, inventory, purchases and payroll.

Reconciles all banks account statements every month.

Manage and fix assets / depreciation.

Consults with the Division President regarding profit and loss investment accounts.

Prepare yearly budget. 

Review records for third party accounting firm. 

Prepares 1099 forms at the year-end for contract labor. 

Support Shipping and Receiving Specialist and payroll process as needed. 

Assist the Division President with multiple special projects.

Process business expense reimbursements. 

Compiles information for the company liability insurance and presents/ recommends to Division President.

Process ACH and AP checks for Payments

  Accounting Manager Qualifications  

1. Bachelor’ s degree (B.A.)   or equivalent from a four – year college or university in Accounting /Finance or equivalent experience 
2. 3 + years’ experience in accounting or finance is preferred 
3. High ethical and moral standards
4. Mathematical skills
5. Computer usage 
6. Time Management
7. Office Clerical skills    
8. Valid Driver’ s License 

  Pay for the Accounting Manager: $50k -$55k per year   Apply online www.imko.com - Stop into the IMKO office between 9 AM - 3 PM
  If you have questions, please call us at 712-224-2480 #INDSCTY ]]> Wed, 15 Jul 2026 00:00:00 CDT 0 Mechanical Assembler
Positions Available in St. Joseph, MO & Wathena, KS
Starting at $21.37-$23.87/hour | Weekly Pay | All Shifts Available
1st Shift: 6: 30 AM-2: 30 PM — $21.37/hour2nd Shift: 1: 30 PM-10: 00 PM — $23.87/hour3rd Shift: 10: 00 PM-6: 00 AM — $23.87/hour
Looking for a hands-on manufacturing career with competitive pay and opportunities to grow? IMKO Workforce Solutions is hiring experienced Mechanical Assemblers for a leading manufacturing company with openings in St. Joseph, Missouri and Wathena, Kansas. If you enjoy working with tools, reading blueprints, and building quality products, we' d love to hear from you.
What You' ll Do

• Assemble mechanical components according to blueprints and hydraulic diagrams
• Prepare and fit multiple components together
• Read and accurately use a tape measure
• Perform rework as needed to meet quality standards
• Follow all company safety and quality procedures
• Learn and follow work instructions and JQRs
• Operate department equipment safely and efficiently
• Support Lean Manufacturing (APS) initiatives
• Assist other production areas as needed

What We' re Looking For

• High School Diploma or GED required
• Previous mechanical assembly experience required
• Ability to read blueprints and hydraulic diagrams
• Ability to accurately read a tape measure
• Strong mechanical aptitude and attention to detail
• Reliable attendance and commitment to quality

Why You' ll Love This Opportunity

• Competitive starting pay up to $23.87/hour
• Positions available in St. Joseph, MO & Wathena, KS
• 1st, 2nd, and 3rd shifts available
• Weekly pay
• Paid vacation
• Paid holidays
• Health, dental, life, short-term disability, and long-term disability insurance
• Opportunity to work for a respected manufacturing employer
• Potential for overtime based on production needs

Apply Today
Ready to build your future with a great manufacturing team?Submit your resume to jessicaw@imko.com to get started.
#INDSTJO]]> Wed, 15 Jul 2026 00:00:00 CDT 0

Creating Sales

Maintains Sales Kit Book, keeping prices current and items updated.

Prepare quotes from Sales Work Order per customer requests. 

Visits job sites to gather information to prepare quotations.

Prepare quotes and presents for customers.

Complete Sold and Sales Orders; Special Orders and Stock MR’ s. 

Confers with operations supervisor on Plan & Spec and Design Build blueprints, spec book and project scopes.

Confers with operations supervisor in planning and executing work procedures, interpreting specifications, and coordinating various phases of project. 

Confers with operations project supervisor about use if tools and equipment for the projects.  

Other duties assigned 

  What you will make as a Journeyman  Starting pay $70K year   Hours:   **Must be able to commit to working overtime.  M-Th 7am – 5pmFri 7am – 11am  One Sat on occasion     IMKO Pays Weekly on Fridays!
  IMKO offers Paid Holidays and Paid Vacation
  Apply online www.imko.com - Stop into the IMKO office between 9 AM - 3 PM

  IMKO offers Medical Coverage - Access to affordable and comprehensive group medical coverage. If you have questions, please call us at 712-224-2480 #INDSCTY]]> Fri, 10 Jul 2026 00:00:00 CDT 0 Extruder Machine Operator-  
-Must have previous manufacturing experience.
-Efficiently operate extruder and shedder machinery.
-Must be able to analyze product info sheets and properly adjust machine settings prior to operations.
-Weigh and prepare finished products and identify product defects.
please send resume to kendra@imko.com
#INDSTJO]]> Thu, 09 Jul 2026 00:00:00 CDT 0 Performs difficult and unusual TIG welding operations on a wide variety of grades of steel to make assemblies involving complex setups, procedures, and fixtures. Uses other equipment in the fabrication process which includes saw, grinders, various hand power tools, etc.  Performs duties under thesupervision of a Fabricator II team member and/or Supervisor.
Job Responsibilities:

• Works with limited supervision to meet engineering drawing specifications.
• Able to TIG weld in all positions.
• Troubleshoots complex weldments when parts don’ t fit up right, parts are missing, or parts are made wrong and corrects the issue by fabricating to make it work or notifying Supervision to get corrected or missing parts produced.
• Able to travel to customer locations for installs.
• Sets welding machine voltage and wire speed for proper fusion of metals following standard work methods and detail engineering drawings/prints.
• Produces complex weld assemblies within tight tolerances where considerable knowledge and skill in the field of welding and fabrication are required to produce quality results.
• Performs regular maintenance per ISO Company standards and fills out the required paperwork.
• Performs minor repairs on welding equipment to ensure proper working order.
• Inspects weldments for obvious and non-obvious defects such as but not limited to: weld splatter, rough welds, missing welds, pin holes.
• Fills out all job-related paperwork on Job Travelers to meet company ISO standards.
• Performs other duties as assigned.

Job Skills:

• Basic reading, writing and math skills.
• Able to convert fractions to decimals, and metric to inches.
• Advanced blue print reading and interpretation.
• Advanced measuring tool knowledge to include tape measures, calipers, etc.
• Able to operate material handling devices to include Fork Trucks, and Cranes/Hoists.
• Meet all the qualifications of Welder II.
• Good standing with Attendance.
• Few to no errors that create rework NCT tags.
• Works efficiently completing jobs within estimated/average times.

Education:

• Weld school or obtains Certified Welding Certificates.

Certifications:

• AWS D1.1 Structural Steel
• AWS D1.2 Aluminum
• AWS D1.3 Sheet Steel
• AWS D1.6 Stainless Steel

Physical Requirements:

• Moderate physical demand.
• Frequent lifting/moving weights up to 70 lbs.
• Frequent standing/walking throughout an 8 hour shift.
• Occasional pushing, pulling, bending kneeling, twisting, reaching, and climbing.
• Able to work in hot and cold environments.

]]> Thu, 09 Jul 2026 00:00:00 CDT 0 Responsibilities:

• Collect product samples for quality testing.
• Perform visual inspections to identify product defects or quality concerns.
• Record inspection results accurately using company documentation.
• Communicate quality issues to the appropriate team members.
• Sort products and remove defective items from production.
• Repackage products as needed to meet quality standards.
• Assist with general warehouse and production duties.
• Work collaboratively with the quality team to support daily operations.

Qualifications:

• Previous warehouse, production, or material handling experience preferred.
• Quality control experience is a plus.
• Strong attention to detail and organizational skills.
• Ability to work independently and as part of a team.
• Good communication and problem-solving skills.
• Reliable with excellent attendance.
• Basic computer skills; Microsoft Office experience is a plus.
• Ability to bend, stoop, reach overhead, and work in a warehouse environment.

Pay & Schedule:

• Starting Pay: $21.00/hour
• Weekday Night Shift Differential: +$1.25/hour
• Weekend Night Shift Differential: +$2.50/hour

Training Schedule:

• Monday– Friday | 8: 00 AM – 4: 30 PM (2– 4 weeks)

Available Shifts:

• Week Nights: Monday– Wednesday 7: 00 PM – 7: 00 AM, Thursday 7: 00 PM – 1: 00 AM
• Weekend Nights: Friday 1: 00 AM – 7: 00 AM, Friday– Sunday 7: 00 PM – 7: 00 AM

#INDSXF]]> Thu, 09 Jul 2026 00:00:00 CDT 0 Performs difficult and unusual TIG welding operations on a wide variety of grades of steel to make assemblies involving complex setups, procedures, and fixtures. Uses other equipment in the fabrication process which includes saw, grinders, various hand power tools, etc. Performs duties with little to no Supervision.
Job Responsibilities:

• Works with no supervision to meet engineering drawing specifications.
• Able to TIG weld in all positions.
• Troubleshoots complex weldments when parts don’ t fit up right, parts are missing, or parts are made wrong and corrects the issue by fabricating to make it work or notifying Supervision to get corrected or missing parts produced.
• Works with Supervision and Engineering for process improvements to produce quality parts in an efficient manner.
• Able to travel to customer locations for installs.
• Sets welding machine voltage and wire speed for proper fusion of metals following standard work methods and detail engineering drawings/prints.
• Produces complex weld assemblies within tight tolerances where considerable knowledge and skill in the field of welding and fabrication are required to produce quality results.
• Performs regular maintenance per ISO Company standards and fills out the required paperwork.
• Performs minor repairs on welding equipment to ensure proper working order.
• Inspects weldments for obvious and non-obvious defects such as but not limited to: weld splatter, rough welds, missing welds, pin holes.
• Fills out all job-related paperwork on Job Travelers to meet company ISO standards.
• Performs other duties as assigned.

Job Skills:

• Basic reading, writing and math skills.
• Able to convert fractions to decimals, and metric to inches.
• Advanced blue print reading and interpretation.
• Advanced measuring tool knowledge to include tape measures, calipers, etc.
• Able to operate material handling devices to include Fork Trucks, and Cranes/Hoists.
• Meet all the qualifications of Fabricator I.
• Good standing with Attendance.
• Few to no errors that create rework NCT tags.
• Works efficiently completing jobs within estimated/average times.

Education:

• Weld school or obtains Certified Welding Certificates.

Certifications:

• AWS D1.1 Structural Steel
• AWS D1.2 Aluminum
• AWS D1.3 Sheet Steel
• AWS D1.6 Stainless Steel
• Class E Drivers License

Physical Requirements:

• Moderate physical demand.
• Frequent lifting/moving weights up to 70 lbs.
• Frequent standing/walking throughout an 8 hour shift.
• Occasional pushing, pulling, bending kneeling, twisting, reaching, and climbing.
• Able to work in hot and cold environments.

]]> Thu, 09 Jul 2026 00:00:00 CDT 0 Responsibilities:

• Maintain accurate financial records and prepare journal entries.
• Manage general ledger transactions and accounting documentation.
• Process Accounts Payable and assist with Accounts Receivable.
• Process invoices, purchase orders, and bill payments.
• Research and resolve accounting discrepancies.
• Prepare shipping and financial documentation as needed.
• Maintain organized financial records and support internal controls.
• Answer phones, greet visitors, and assist with general office administrative tasks.
• Perform additional accounting and administrative duties as assigned.

Qualifications:

• Previous accounting experience required.
• Experience with QuickBooks Desktop and Microsoft Office preferred.
• Strong attention to detail and organizational skills.
• Ability to work independently and manage multiple priorities.
• Excellent written and verbal communication skills.
• Manufacturing accounting experience is a plus.
• Bachelor' s degree in Accounting, Finance, Business, or related field preferred.
• 5+ years of accounting experience preferred.

Pay & Schedule:

• $25.00–$35.00/hour, depending on experience.
• Monday– Friday | 8: 30 AM – 5: 00 PM
• Overtime available as business needs require.

#INDSXF]]> Thu, 09 Jul 2026 00:00:00 CDT 0 Performs difficult and unusual TIG welding operations on a wide variety of grades of steel to make assemblies involving complex setups, procedures, and fixtures with little direction from Senior Personnel or Management.
Job Responsibilities: 

• Works with limited supervision to complete tasks meeting engineering specifications.
• Able to TIG weld in all positions.
• Sets welding machine voltage and wire speed for proper fusion of metals following standard work methods and detail engineering drawings/prints.
• Produces complex weld assemblies within tight tolerances where considerable knowledge and skill in the field of
  welding are required to produce quality results.
• Performs regular maintenance per ISO Company standards and fills out the required paperwork.
• Performs minor repairs on welding equipment to ensure proper working order.
• Inspects weldments for obvious and non-obvious defects such as but not limited to: weld splatter, rough welds, missing welds, pin holes.
• Assists in training Welder 1 team members in proper procedures, techniques and tool use.
• Fills out all job-related paperwork on Job Travelers to meet company ISO standards.
• Performs other duties as assigned.

Job Skills:

• Basic reading, writing and math skills.
• More advanced blueprint reading and interpretation.
• Basic measuring tool knowledge to include tape measures, calipers, etc.
• Good standing with Attendance
• Few to no errors that create rework NCT tags.
• Works efficiently completing jobs within estimated/average time given.

Education:

• Weld school or obtains AWS Certified Welding Certificate(s).

Certifications:

• AWS D1.1

Physical & Environmental Requirements

• Moderate physical demand.
• Frequent lifting/moving weights up to 70 lbs.
• Frequent standing/walking throughout an 8 hour shift.
• Occasional pushing, pulling, bending, kneeling, twisting and reaching.
• Able to work in hot and cold environments

]]> Thu, 09 Jul 2026 00:00:00 CDT 0 Other duties may be assigned.1. Design components and sub-systems of precision drilling machines, including tooling, fixtures, and automation systems.2. Analyze mechanical systems including bearings, drive belts, ball screws, motor torque and horsepower requirements, machine components, and structural weldments for assurance of function and suitability of use.3. Draft details of mechanical components of machines, itemized assembly drawings, floor plan layouts, and installation diagrams using AutoCAD.4. Design hydraulic and pneumatic systems and create schematic drawings.5. Determine suitability and specify purchased components used in the building of each machine.6. Create BOMs (bill of materials) for machine assemblies and sub-assemblies.7. Communicate with customers to clarify machine requirements.8. Communicate with component suppliers to stay informed of current market trends, and product developments.9. Interface with fabrication, machine shop, and assembly departments to complete construction of machines, including revision of drawings and incorporation of suggestions as they occur.10. Ability to maintain confidentiality.
Qualifications and Requirements:  To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.1. BS in Mechanical Engineering, Mechanical Engineering Technology, or related degree.2. 2-5 years’ experience in design of manufacturing equipment or industrial machinery (preferred).3. Applied mathematical skills and mechanical analysis ability.4. Good verbal and written communication skills.5. Excellent computer skills with drafting and AutoCAD proficiency.
Physical Demands and Work Environment: The physical requirements described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.1. While performing the duties of this job, the employee is regularly required to talk and hear. The employee is frequently required to stand, bend, kneel, climb stairs and walk; use hands to touch, handle, or feel; and reach with hands and arms. The employee must frequently lift and/or move up to 50 pounds for men or 30 pounds for women. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus.2. The work environment is usually an indoor setting with some exposure to outside elements. The noise level in the work environment is tolerable. This position requires infrequent travel, which may involve exposure to extreme weather elements.3. Must abide by PPE requirements.]]> Thu, 25 Jun 2026 00:00:00 CDT 0 Essential Functions include the following. Other duties may be assigned.1. Install electrical components of DeHoff, Eldorado, and TechniDrill precision deep-hole drilling machines and other automated equipment.2. Debug and troubleshoot of electrical and software systems on equipment.3. Provide sketches to supervisors of work to be performed on electrical components in other departments (welding, machine shop, etc.).4. Set and program VFD (variable frequency drive) parameters on equipment.5. Provide red line drawing changes for discrepancies or alterations, if needed.6. Provide maintenance support on all equipment, machines, and the facility as required.7. Perform daily housekeeping, keeping the work area and facility clean and organized.8. Attend all required company meetings and job specific training.9. Abide by all safe work policies and procedures.
Qualifications and Requirements: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.1. High school diploma or equivalent preferred.2. Technical Degree or combined experience and/or training in relative field.3. Applied mathematical skills and mechanical aptitude a plus! 4. Knowledge and experience with assembly and maintenance of electrical systems and components preferred.5. Ability to read and interpret electrical schematics and mechanical drawings.6. Experience with basic measuring equipment including but not limited to a multi-meter and tachometer.7. Ability to work as a team, collaborating with peers and members of management.8. Ability to maintain confidentiality.
Physical Demands and Work Environment: The physical requirements described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.1. While performing the duties of this job, the employee is regularly required to talk and hear. The employee is frequently required to stand, bend, kneel, climb stairs and walk; use hands to touch, handle, or feel; and reach with hands and arms. The employee must frequently lift and/or move up to 50 pounds for men or 30 pounds for women. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus.2. The work environment is usually an indoor setting with some exposure to outside elements. The noise level in the work environment is tolerable. This position requires infrequent travel, which may involve exposure to extreme weather elements.3. Must abide by PPE requirements.]]> Thu, 25 Jun 2026 00:00:00 CDT 0 Essential Functions include the following. Other duties may be assigned.1. Install mechanical components of Dehoff, Eldorado, and TechniDrill precision deep-hole drilling machines, including hydraulic, pneumatic, and mechanical systems.2. Assemble coolant systems, chip conveyers, automation equipment, and other auxiliary machine systems.3. Provide red-line drawing changes for discrepancies or alternations, if necessary.4. Provide maintenance support on all equipment, machines, and the facility as required.5. Abide by all safety policies and procedures, attend safety training, and perform proper housekeeping by keeping work area clean and organized.6. Maintain confidentiality as appropriate.
Qualifications and Requirements: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.1. High school diploma or equivalent is preferred.2. Associate degree from a technical school or equivalent combination of education, training, and at least two (2) years of hands-on experience in equipment assembly, maintenance, or industrial machinery is preferred.3. Demonstrated experience working with machinery systems, including hydraulic, pneumatic, mechanical, and electrical components.4. Ability to read and interpret schematics, blueprints, and mechanical drawings accordingly.5. Proven ability to collaborate effectively and work as part of a team.
Physical Demands and Work Environment: The physical requirements described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.1. While performing the duties of this job, the employee is regularly required to talk and hear. The employee is frequently required to stand, bend, kneel, climb stairs and walk; use hands to touch, handle, or feel; and reach with hands and arms. The employee must frequently lift and/or move up to 50 pounds for men or 30 pounds for women. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus.2. The work environment is usually an indoor setting with some exposure to outside elements. The noise level in the work environment is tolerable. This position requires infrequent travel, which may involve exposure to extreme weather elements.3. Must abide by PPE requirements.]]> Thu, 25 Jun 2026 00:00:00 CDT 0 Essential Functions include the following. Other duties may be assigned.1. Setup of CNC controls, including setting parameters for motors, drives, and I/O configuration.2. Develop, write, and troubleshoot PMC/PLC, HMI, CNC, and motion control programs for new machines and retrofit packages.3. Install, test, and validate software on production floor and occasionally at customer sites.4. Program and configure FANUC CNC controls, including ladder logic, PMC, macro programming, and servo/motion parameters.5. Develop HMI screens and user interfaces for machine operation.6. Collaborate with the mechanical and electrical engineering to ensure full system integration.7. Create documentation, including electrical schematics, machine manual sections for controls, and troubleshooting guides.8. Provide technical support, diagnostics, and corrective actions for internal teams and customers.9. Ensure compliance with safety standards, industry requirements, and best practices.10. Ability to maintain confidentiality.
Qualifications and Requirements: To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.1. Bachelor’ s degree in Electrical Engineering, Automation, Computer Engineering, or related field; or equivalent technical experience.2. 2+ years of experience programming industrial controls for CNC systems.3. Strong aptitude in ladder logic programming.4. Ability to read and interpret electrical schematics, mechanical drawings, and technical documentation.5. Technical writing experience highly recommended.6. Proficient troubleshooting skills, including root-cause analysis of electrical and software issues.7. Applied mathematical skills and mechanical analysis ability.8. FANUC CNC programming:

• Macro programming
• PMC ladder logic
• G-code optimization
• Servo tuning and parameter setup

Physical Demands and Work Environment: The physical requirements described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.1. While performing the duties of this job, the employee is regularly required to talk and hear. The employee is frequently required to stand, bend, kneel, climb stairs and walk; use hands to touch, handle, or feel; and reach with hands and arms. The employee must frequently lift and/or move up to 50 pounds for men or 30 pounds for women. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus.2. The work environment is usually an indoor setting with some exposure to outside elements. The noise level in the work environment is tolerable. This position requires infrequent travel, which may involve exposure to extreme weather elements.3. Must abide by PPE requirements.]]> Thu, 25 Jun 2026 00:00:00 CDT 0

Development of mechanical piping and instrumentation diagrams (P&IDs)

Development of mechanical equipment specifications

Sizing and design of mechanical systems

Review assembly and detailed fabrication drawings for construction

Support manufacturing and service during production/commissioning

Adhere to company and client engineering standards and procedures

Communicate with contractors and customers using clear verbal and written communication

  Required CompetenciesEducation: Bachelor’ s degree in Mechanical Engineering (ABET Accreditation) or relevant experienceExperience:

1. Basic proficiency with Microsoft Office Suite (Word, Excel, PowerPoint, and Outlook)
2. Basic understanding of mechanical assembly
3. Basic understanding of materials and equipment selection

  Skills:

1. Strong understanding of engineering principles and design methodologies
2. Excellent verbal and written communication skills to convey technical details to peers and customers
3. Advanced problem-solving and analytical abilities
4. Focus and attention to detail for complex mechanical systems
5. Ability to work in a collaborative team environment
6. Strong time management and organizational skills
7. Fluent in English

  Reporting LinesReports To: Engineering ManagerSupervisees: N/A  Interaction with Other Departments

1. Sales
2. Production
3. Service

  Disclaimer 

1. The above statements describe the principal and essential functions, but not all functions that may be inherent in the job.  
2. This job requires the ability to perform duties contained in the job description for this position, including, but not limited to, the above requirements.    
3. Reasonable accommodation will be made for otherwise qualified applicants, as needed, to enable them to fulfil these requirements.

]]> Wed, 24 Jun 2026 00:00:00 CDT 0 Job Summary
The Wash Tank position involves cleaning and maintaining wash tanks used in industrial processes to ensure optimal functionality and cleanliness. You will spray and clean manufactured parts and assemblies.

Monday - Friday 7AM to 3: 30PM

Duties
- Clean wash tanks by removing residue, sludge, and contaminants
- Use appropriate cleaning agents and tools to sanitize wash tanks and parts
- Follow safety protocols and guidelines while handling hazardous materials
- Monitor water levels and temperature in wash tanks
- Document maintenance activities and report any issues to supervisors

Skills
- Knowledge of industrial cleaning procedures
- Ability to use cleaning equipment and chemicals safely
- Attention to detail for thorough tank inspection
- Understanding of safety protocols when working with hazardous materials
- Physical stamina for manual labor tasks

Job Type: Full-time

Benefits:

• Dental insurance
• Health insurance
• Life insurance
• Vision insurance

]]> Wed, 24 Jun 2026 00:00:00 CDT 0

Create and update design drawings, including electrical one-lines, three-lines, control diagrams, and panel layouts.

Develop IO lists specifying devices to be connected to a PLC’ s inputs and outputs

Generate detailed BOMs (Bills of Materials) for electrical damage.

Prepare cost estimates for electrical systems and design.

Author operations manuals, proposals, and design documentation.

Implement safety features such as grounding systems, overcurrent protection devices, and

electrical isolation procedures to mitigate hazards.

Interpret and apply information from mechanical and electrical drawings to designs.

Adhere to company and client engineering standards and procedures.

Ensures electrical designs comply with local and national electrical codes and standards.

Communication with contractors and customers using clear verbal and written communication.

  Required CompetenciesEducation: Bachelor’ s degree in electrical engineering (ABET Accreditation) or relevant experienceExperience:

1. Basic proficiency with Microsoft Office Suite (Word, Excel, PowerPoint, and Outlook)
2. Experience designing Industrial Control Panels (UL508A compliance)
3. Familiarity with the National Electric Code for designing electrical systems
4. Experience using AutoCAD Electrical for design projects.

   Skills:

1. Strong understanding of electrical engineering principles and design methodologies.
2. Excellent verbal and written communication skills to convey technical details to peers and customers.
3. Advanced problem-solving and analytical abilities.
4. Focus and attention to detail for complex electrical systems.
5. Ability to work in a collaborative team environment
6. Strong time management and organizational skills
7. Fluent in English

  Reporting LinesReports To: Electrical Engineering ManagerSupervisees: N/A  Interaction with Other Departments

1. Sales
2. Production
3. Service

  Disclaimer 

1. The above statements describe the principal and essential functions, but not all functions that may be inherent in the job.  
2. This job requires the ability to perform duties contained in the job description for this position, including, but not limited to, the above requirements.    
3. Reasonable accommodation will be made for otherwise qualified applicants, as needed, to enable them to fulfil these requirements.

]]> Wed, 24 Jun 2026 00:00:00 CDT 0

Creating/replicating designs for t-shirts and other apparel

Drawing/Illustration skills a plus

Performing color separations, and outputting films for production.

Updating the work-order database

Working with a large format printer (Roland)

  The ideal Graphic Designer candidate should possess the following qualities: 

1. Working with customers provided artwork to adapt/modify the artwork for optimal screen-printing results.
2. Experience working with graphic design software (Illustrator, Corel)
3. A very detail-oriented approach as the position involves dealing with the complexity of customer work-orders and demands a high level of accuracy when separating and outputting artwork.
4. Excellent communication skills (both written and verbal)
5. Exceptional decision making and problem-solving abilities. The starting hourly pay rate will be commensurate with the candidate’ s prior work experience and demonstrated aptitude. 
6. Ability to work in a fast-paced environment and multitask

  What you make as an Graphic Designer:  Starting pay $15-$25 DOE  IMKO Pays Weekly on Fridays!
  IMKO offers Paid Holidays and Paid Vacation  Apply online www.imko.com - Stop into the IMKO office between 9 AM - 3 PM
  IMKO offers Medical Coverage - Access to affordable and comprehensive group medical coverage.   If you have questions, please call us at 712-224-2480. #INDSCTY]]> Tue, 23 Jun 2026 00:00:00 CDT 0 Responsibilities

• Monitor production material levels and replenish raw materials as needed
• Move materials and finished products using a sit-down forklift and pallet jack
• Perform quality checks and audits to ensure finished products meet standards
• Record inventory and quality information in electronic systems
• Move and accurately track finished goods in inventory
• Build boxes and lids for product packaging
• Use a company-issued smartphone to scan and document inventory
• Maintain a clean, organized, and safe work environment
• Assist other departments as needed

Qualifications

• Warehouse, production, or material handling experience preferred
• Forklift experience preferred
• Strong communication, reading, and documentation skills
• Comfortable using mobile technology and electronic systems
• Detail-oriented, organized, and self-motivated
• Ability to work independently and as part of a team
• Reliable attendance and strong work ethic
• Ability to lift up to 50 lbs.
• Ability to stand and walk on concrete for extended periods
• Ability to climb ladders and safely operate material handling equipment

Available Shifts
Weekend Day Shift:

• Thursday: 1: 00 PM – 7: 00 PM
• Friday– Sunday: 7: 00 AM – 7: 00 PM
• Shift Differential Available

Overtime opportunities may be available with management approval.
Apply today to learn more about this exciting manufacturing opportunity!
#INDSXF]]> Thu, 04 Jun 2026 00:00:00 CDT 0 If you enjoy being around live entertainment, working with people, and being part of exciting events, this is the opportunity for you!
What You could Be Assigned To Do:

• Assisting guests and event attendees
• Checking tickets and wristbands
• Directing foot traffic and helping with crowd flow
• Supporting event setup and teardown
• Providing excellent customer service
• Helping ensure the event runs smoothly and safely

What We' re Looking For:✔ Positive attitude and strong work ethic
✔ Reliable and punctual
✔ Comfortable working outdoors
✔ Ability to stand and walk for extended periods
✔ Friendly and professional demeanor
✔ Team players who enjoy fast-paced environments
Why You' ll Love It:? Be part of one of the biggest weekends of the summer
? Earn extra money
? Meet new people
☀ Work outdoors
? Fun, high-energy atmosphere
Spots are limited, so apply today and be part of an unforgettable weekend!
#INDSXF]]> Wed, 03 Jun 2026 00:00:00 CDT 0 Tue, 02 Jun 2026 00:00:00 CDT 0 Tue, 02 Jun 2026 00:00:00 CDT 0 We are seeking a skilled Machine Operator to join our dynamic manufacturing team. The ideal candidate will be responsible for operating and maintaining various types of machinery, ensuring that production processes run smoothly and efficiently. This role requires a keen eye for detail and a commitment to quality control, as well as the ability to work in a fast-paced factory environment.2nd shift- Mon-Fri 330pm-1200am.Duties

• Operate CNC machines, lathes, and stamping presses to fabricate components according to specifications.
• Perform quality control checks on finished products, utilizing tools such as calipers to ensure precision and adherence to standards.
• Handle materials safely and efficiently throughout the production process, including packaging finished goods for shipment.
• Troubleshoot and resolve minor mechanical issues with machinery as they arise, ensuring minimal downtime.
• Maintain a clean and organized work area, adhering to safety protocols and company policies.
• Collaborate with team members to meet production goals and deadlines while maintaining high-quality output.

Experience

• Previous experience in a manufacturing or factory setting is preferred.
• Steady work history with longevity to reflect reliability, dependability and commitment is preferred.
• Experience working with logic controllers and other automated systems is a plus.
• Strong attention to detail and problem-solving skills are essential for success in this role.
• Ability to work independently as well as part of a team in a fast-paced environment.

If you are passionate about manufacturing and possess the necessary skills to excel as a Machine Operator, we encourage you to apply and become an integral part of our team!]]> Tue, 02 Jun 2026 00:00:00 CDT 0 Robot Welding OperatorRobot Welding Operator is to ensure the safe and efficient operation of all robotically automated welding cells at our Air Park location. This shift is intended to help level load the welding department to minimize and ultimately eliminate the need for OT. These team members will be responsible for set-up, operation and troubleshooting of all automated cells. Although the shift will start out small, it does have the possibility to develop into a larger team depending on workload and team performance.
The following duties will be required but not limited to:• Practice smart operating techniques to ensure the safety of the entire team.
• Set-up of new jobs on all cells
• Efficient production operation with ability to meet proven job rates.
• Troubleshooting of faults experienced during automated production.
• Part inspections
• Non-conforming part quarantine and labeling
• Accurate job progress data recording (both handwritten as well as through Metalworks ERP system)Experience will be necessary for these positions. If you do not have specific experience with the operation of the equipment we are hiring for, general manufacturing experience may be sufficient.


]]> Tue, 02 Jun 2026 00:00:00 CDT 0 Fri, 29 May 2026 00:00:00 CDT 0
We are hiring for a Light Production position in a fast-paced manufacturing environment. This role involves working with plastic parts and completing a variety of tasks throughout the shift.

Responsibilities:

Inspect parts for quality and accuracy
Perform light assembly of plastic components
Package finished products for shipment
Follow work instructions and quality standards
Maintain a clean and organized work area

This is a great opportunity for someone who is detail-oriented and enjoys working in a team environment.
#INDSXF]]> Tue, 26 May 2026 00:00:00 CDT 0 ForkliftWeldingMaterial HandlingWarehouseProductionManufacturing
Must have reliable transportation, able to pass background check and two forms of valid ID for work authorization.  Apply at www.imko.com or email resume to mikef@imko.com
#INDLIN


]]> Tue, 19 May 2026 00:00:00 CDT 0 Pay:

• Competitive hourly pay
• 
  
  • $1.00 shift differential
• Overtime (40+ hours) paid at time and a half
• Monthly bonus opportunities

Position OverviewA well-established manufacturing company is seeking a skilled CNC Operator to join their team. This position is responsible for operating CNC mill machines and assisting with laser cutting equipment in a fast-paced production environment.
Responsibilities

• Operate CNC machines and drills independently
• Load and unload metal materials
• Read and interpret blueprints and technical drawings
• Measure and verify parts using precision tools (calipers, micrometers, etc.)
• Inspect finished products to ensure quality standards are met
• Perform routine maintenance on machines
• Maintain a clean and organized workspace
• Assist with inventory as needed

Qualifications

• High School Diploma or equivalent
• 4+ years of CNC machining experience preferred
• Knowledge of metal fabrication processes

Skills & Requirements

• Strong attention to detail
• Ability to work in a fast-paced environment
• Good communication skills
• Strong work ethic and willingness to learn
• Ability to meet physical demands, including lifting up to 50 lbs

Benefits

• Medical, dental, and vision insurance
• 401(k) with company match
• Paid holidays and PTO
• Monthly bonus opportunities
• Safety gear reimbursement
• Company-provided work apparel

#INDSXF]]> Tue, 19 May 2026 00:00:00 CDT 0 IMKO Workforce Solutions is currently seeking experienced Forklift Operators for a great opportunity! Candidates must have experience operating both a Reach Truck and Cherry Picker in a warehouse environment.Pay Rate

• $20.50/hour

Responsibilities

• Operate reach trucks and cherry pickers safely and efficiently
• Move, load, and organize inventory throughout the warehouse
• Pick and stage orders accurately
• Maintain a clean and safe work environment
• Follow all warehouse safety procedures and company policies

Requirements

• Previous forklift experience required
• Experience with both reach truck and cherry picker equipment
• Ability to lift up to 50 lbs as needed
• Reliable attendance and strong work ethic
• Warehouse experience preferred

Benefits

• Weekly pay
• Opportunity for long-term employment
• Supportive team environment

#INDKC]]> Mon, 11 May 2026 00:00:00 CDT 0 1st Shift: 8AM-4PM3rd Shift: 12AM-8AM
#INDSXF]]> Wed, 06 May 2026 00:00:00 CDT 0 Key Responsibilities:

• Prepare and deliver materials and containers to the production floor in a timely manner.
• Perform machine setups, tool changes, offsets, and complete changeovers as needed.
• Operate various machines and equipment for fabrication and assembly tasks.
• Complete assignments independently, safely, and efficiently.
• Diagnose and resolve production-related issues during regular operations.
• Ensure all safety procedures are followed and that safety devices are in proper working order.
• Conduct minor preventative maintenance and maintain cleanliness of machines and work areas.
• Follow quality control procedures, including first-piece inspection and documentation.
• Inspect parts using blueprints, calipers, height gauges, and other measuring tools (training available).
• Experience with G-code is a plus.
• Take part in scrap removal, tool maintenance, and general housekeeping.
• Open to cross-training and assisting with additional duties across departments as needed.

Physical & Environmental Requirements:

• Must be able to stand on concrete for 8+ hours per day.
• Frequent bending, lifting (up to 40 lbs), and other physical movements required.
• Comfortable working in environments exceeding 90° F for extended periods.
• Capable of multitasking and learning to operate multiple machines.
• Willing to work overtime and weekends when necessary.
• Must wear appropriate PPE including safety shoes, glasses, and hearing protection.

Preferred Qualifications:

• High school diploma or GED
• Strong communication and reading/writing skills
• Basic math skills and the ability to read blueprints
• Mechanical aptitude or willingness to learn machine operations
• Reliable, organized, and proactive in completing tasks
• Flexibility to work additional hours as needed

#INDSXF]]> Thu, 30 Apr 2026 00:00:00 CDT 0
Job Responsibilities

• Work on the production line while maintaining speed, accuracy, and consistency
  
  
• Follow all production procedures and quality standards
  
  
• Verify product information and quantities using required paperwork
  
  
• Report any product, equipment, or quality issues to the supervisor or team lead
  
  
• Pick, stage, and prepare materials and orders for processing or shipment
  
  
• Operate production equipment, tools, and machinery safely
  
  
• Perform repetitive tasks related to seed handling, packaging, and preparation
  
  
• Build, stack, and wrap pallets for storage or distribution
  
  
• Apply proper labels, tags, and identification to finished product
  
  
• Work with team members to meet daily production and shipping deadlines
  
  
• Follow all written instructions, standard operating procedures, and safety guidelines
  
  
• Maintain a clean, organized, and safe work environment
  
  
• Assist with additional warehouse or production duties as assigned
  
  

Required Qualifications

• Strong attention to detail
  
  
• Ability to follow instructions and work in a fast-paced environment
  
  
• Basic math and reading skills
  
  
• Ability to work independently and as part of a team
  
  
• Reliable attendance and strong work ethic
  
  
• Ability to perform repetitive tasks for extended periods
  
  
• Ability to lift and move up to 50 lbs regularly
  
  
• Willingness to work overtime when needed
  
  

#INDSXF]]> Mon, 27 Apr 2026 00:00:00 CDT 0
We are hiring for a Light Production position in a fast-paced manufacturing environment. This role involves working with plastic parts and completing a variety of tasks throughout the shift.

Responsibilities:

Inspect parts for quality and accuracy
Perform light assembly of plastic components
Package finished products for shipment
Follow work instructions and quality standards
Maintain a clean and organized work area

This is a great opportunity for someone who is detail-oriented and enjoys working in a team environment.
#INDSXF]]> Fri, 10 Apr 2026 00:00:00 CDT 0

Perform MIG welding on steel parts in a production setting

Read and follow blueprints and work instructions

Set up and operate welding equipment

Inspect finished parts to ensure quality standards are met

Perform basic equipment checks and change-overs

Maintain a clean and safe work area

Follow all safety procedures and PPE requirements

Requirements

• Minimum 2 years of welding experience
• MIG welding experience required
• Ability to read blueprints
• Experience working with steel fabrication preferred
• Ability to lift up to 50 lbs
• Ability to stand for long periods
• Reliable attendance and strong work ethic

#INDSXF]]> Thu, 26 Mar 2026 00:00:00 CDT 0 Responsibilities

• Assemble and produce parts using production equipment
• Operate machines and follow work instructions
• Inspect parts to ensure quality standards are met
• Perform basic fabrication, assembly, or welding tasks as needed
• Complete production paperwork and report any issues
• Follow all safety procedures and wear required PPE
• Keep work area clean and organized
• Work in a fast-paced manufacturing environment

Requirements

• Previous production or manufacturing experience preferred
• Ability to lift up to 50 lbs
• Ability to stand for long periods of time
• Basic math and measuring skills
• Good hand dexterity and attention to detail
• Ability to work in warm manufacturing conditions at times
• Reliable attendance and strong work ethic

#INDSXF]]> Thu, 26 Mar 2026 00:00:00 CDT 0
Key Responsibilities & Duties:*Operate and monitor manufacturing equipment according to safety guidelines.*   Ensuring a clean and orderly work environment, including completing the Master Sanitation Schedule (MSS).* Observing all safety and security procedures and reporting unsafe conditions.* Participate in company-sponsored training and maintain proficiency in production and safety policies (e.g., Lockout/Tag out, PPE, and hazard communication).Employee Benefits:* Vacation Pay (must meet eligibility requirements)
* Holiday Pay (must meet eligibility requirements)
* Health, Dental and Vision Insurance!
* Pay increase once hired on! Great Career Advancement!
* Weekly Pay
* Overtime Available
For more information on this opening please call 402 805 4373 or stop into the office at 3302 O Street to apply today!
#INDLIN

]]> Fri, 13 Mar 2026 00:00:00 CDT 0

$17.50 per hour

Schedule

• Up to 40 hours per week
• Monday – Friday
• Shift between 8: 00 AM – 5: 00 PM (up to 8 hours per day)

Job Duties

• Use the Warehouse Management System to pick and process outbound orders
• Restock inventory from incoming shipments
• Pack, label, and prepare orders for shipping
• Maintain accurate inventory counts
• Work closely with warehouse staff to complete orders on time
• Follow safety procedures and keep work area clean
• Perform general warehouse duties as assigned
• Work in a fast-paced environment while maintaining accuracy

Requirements

• Warehouse or production experience preferred but not required
• Ability to lift up to 50 lbs
• Ability to stand, walk, bend, and lift throughout the shift
• Strong attention to detail and reliability
• Willingness to learn new systems

Background CheckCandidates must complete a background check sent by email after the interview.
#INDSXF]]> Mon, 09 Mar 2026 00:00:00 CDT 0 Duties Include:
*Operating high-pressure and low-pressure boilers.* Manufacturing and directing steam lines running to various buildings.* Monitoring equipment and performing chemical testing.* Performing carpentry, janitorial, painting, and plumbing duties as directed.* Executing general preventative maintenance.
Qualifications:
*Basic knowledge and experience with hand tools.* Basic plumbing knowledge and understanding of piping mechanics.*Ability to remain flexible and respond to changing weather conditions.*A valid driver’ s license (or the ability to obtain one) is required.*Availability for some on-call hours outside of regular shifts.
Employee Benefits:
* Vacation Pay (must meet eligibility requirements)
* Holiday Pay (must meet eligibility requirements)
* Health, Dental and Vision Insurance!
* Pay increase once hired! Great Career Advancement!
* Weekly Pay
* Overtime Available
For more information on this opening please call 402-805-4373 or stop into the office at 3302 O Street to apply today!
#INDLIN]]> Thu, 05 Mar 2026 00:00:00 CST 0 IMKO Workforce Solutions is URGENTLY looking for qualified candidates for Welding Operators!  ( No experience needed)

Key Responsibilities & Duties:
* Operate machines safely and efficiently
* Read and Understand Machine Instructions
* Perform as an active/ contributing team member by supporting and performing all the tasks
* Ability to work independently and overtime as needed
* Basic math and measuring skills are a must * Maintain efficiency in a high-volume environment * Be on your feet up to 10 hours* Be able to lift up 20 pounds * Be able to multitask
* Demonstrate a commitment to the company' s policies and values!

Employee Benefits:
* Vacation Pay (must meet eligibility requirements)
* Holiday Pay (must meet eligibility requirements)
* Health, Dental and Vision Insurance!
* Pay increase once hired on! Great Career Advancement!
* Weekly Pay
* Overtime Available
For more information on this opening please call 402 805 4373 or stop into the office at 3302 O Street to apply today!
#INDLIN

]]> Thu, 05 Mar 2026 00:00:00 CST 0 IMKO Workforce Solutions is URGENTLY looking for qualified candidates for Press Brake Operators!

Key Responsibilities & Duties:
* Operate machines safely and efficiently/ CNC press brakes
* Read and Understand Machine Instructions
* Perform as an active/ contributing team member by supporting and performing all the tasks
* Ability to work independently and overtime as needed
*   Basic math and measuring skills are a must * Maintain efficiency in a high-volume environment * Be on your feet up to 10 hours
* Demonstrate a commitment to the companies policies and values!

Employee Benefits:
* Vacation Pay (must meet eligibility requirements)
* Holiday Pay (must meet eligibility requirements)
* Health, Dental and Vision Insurance!
* Pay increase once hired on! Great Career Advancement!
* Weekly Pay
* Overtime Available
For more information on this opening please call 402 805 4373 or stop into the office at 3302 O Street to apply today!
#INDLIN]]> Thu, 05 Mar 2026 00:00:00 CST 0

Business Development:  Independently drive new business growth by identifying and acquiring new clients, conducting discovery calls, and negotiating fee agreements.

Full-Cycle Recruitment:  Own the recruitment process for direct-hire roles, from understanding client needs and building talent pipelines to conducting behavioral interviews and closing the offer.

Candidate Sourcing:  Aggressively source and engage passive and active candidates through extensive networking, social media platforms, and targeted outreach.

Market Consultation:  Partner with hiring managers to define hiring requirements, provide market intelligence, and advise on compensation strategies to ensure competitive positioning.

Placement & Onboarding:  Manage the final stages of placement, including salary negotiation, reference checks, and facilitating a smooth onboarding experience for new hires.

Account Management:  Maintain strong relationships with clients, providing regular updates and ensuring high levels of satisfaction to foster long-term partnerships.

Required Skills & Qualifications:

• Full Desk Experience:  Prior recruitment experience, specifically within direct hire/permanent placement. Must have a proven history of managing a full desk independently from start to finish.
• Sales & Negotiation:  Proven ability to build a client portfolio and negotiate offers effectively with both candidates and clients.
• Communication:  Exceptional verbal and written communication skills with the ability to interact effectively at all levels of an organization.
• Industry Expertise:  Strong knowledge of [Insert Relevant Sector, e.g., Manufacturing, Industrial, Engineering] and the ability to evaluate technical talent effectively.
• System Proficiency: Advanced proficiency in Applicant Tracking Systems (ATS) and CRM platforms.

 #INDSXF]]> Fri, 27 Feb 2026 00:00:00 CST 0 Key Responsibilities:

• Business Development:  Independently drive new business growth by identifying and acquiring new clients, conducting discovery calls, and negotiating fee agreements.
• Full-Cycle Recruitment:  Own the recruitment process for direct-hire roles, from understanding client needs and building talent pipelines to conducting behavioral interviews and closing the offer.
• Candidate Sourcing:  Aggressively source and engage passive and active candidates through extensive networking, social media platforms, and targeted outreach.
• Market Consultation:  Partner with hiring managers to define hiring requirements, provide market intelligence, and advise on compensation strategies to ensure competitive positioning.
• Placement & Onboarding:  Manage the final stages of placement, including salary negotiation, reference checks, and facilitating a smooth onboarding experience for new hires.
• Account Management:  Maintain strong relationships with clients, providing regular updates and ensuring high levels of satisfaction to foster long-term partnerships.

Required Skills & Qualifications:

• Full Desk Experience:  Prior recruitment experience, specifically within direct hire/permanent placement. Must have a proven history of managing a full desk independently from start to finish.
• Sales & Negotiation:  Proven ability to build a client portfolio and negotiate offers effectively with both candidates and clients.
• Communication:  Exceptional verbal and written communication skills with the ability to interact effectively at all levels of an organization.
• Industry Expertise:  Strong knowledge of [Insert Relevant Sector, e.g., Manufacturing, Industrial, Engineering] and the ability to evaluate technical talent effectively.
• System Proficiency:  Advanced proficiency in Applicant Tracking Systems (ATS) and CRM platforms.

#INDSXF]]> Fri, 27 Feb 2026 00:00:00 CST 0 Key Responsibilities:

• Business Development:  Independently drive new business growth by identifying and acquiring new clients, conducting discovery calls, and negotiating fee agreements.
• Full-Cycle Recruitment:  Own the recruitment process for direct-hire roles, from understanding client needs and building talent pipelines to conducting behavioral interviews and closing the offer.
• Candidate Sourcing:  Aggressively source and engage passive and active candidates through extensive networking, social media platforms, and targeted outreach.
• Market Consultation:  Partner with hiring managers to define hiring requirements, provide market intelligence, and advise on compensation strategies to ensure competitive positioning.
• Placement & Onboarding:  Manage the final stages of placement, including salary negotiation, reference checks, and facilitating a smooth onboarding experience for new hires.
• Account Management:  Maintain strong relationships with clients, providing regular updates and ensuring high levels of satisfaction to foster long-term partnerships.

Required Skills & Qualifications:

• Full Desk Experience:  Prior recruitment experience, specifically within direct hire/permanent placement. Must have a proven history of managing a full desk independently from start to finish.
• Sales & Negotiation:  Proven ability to build a client portfolio and negotiate offers effectively with both candidates and clients.
• Communication:  Exceptional verbal and written communication skills with the ability to interact effectively at all levels of an organization.
• Industry Expertise:  Strong knowledge of [Insert Relevant Sector, e.g., Manufacturing, Industrial, Engineering] and the ability to evaluate technical talent effectively.
• System Proficiency: Advanced proficiency in Applicant Tracking Systems (ATS) and CRM platforms.

#INDSXF]]> Fri, 27 Feb 2026 00:00:00 CST 0 The Quality Weld Specialist ensures welded and fabricated products meet internal quality standards, industry codes, and customer requirements. This role focuses on weld inspection, procedure review, documentation, and continuous improvement while supporting welding operations with technical expertise and quality guidance.
Key Responsibilities:

• Review and support weld procedures to ensure compliance with applicable standards
• Inspect welds and fabricated components using visual and other approved methods
• Interpret blueprints, weld symbols, and technical specifications
• Document inspection results, findings, and corrective actions
• Investigate quality issues and assist with root cause analysis
• Manage and review welder qualifications, certifications, and related documentation
• Support development and maintenance of quality processes and SOPs
• Collaborate with production and engineering to improve weld quality and efficiency
• Support equipment maintenance and quality system requirements
• Provide training and guidance on weld quality and inspection practices
• Ensure compliance with safety and quality policies
• Utilize company systems for documentation and tracking
• Perform additional production support tasks as needed

Qualifications:

• Certified Weld Inspector (CWI) or equivalent certification preferred
• 5+ years of experience in welding, fabrication, or quality assurance environments
• Strong knowledge of weld standards, inspection methods, and documentation
• Ability to read and interpret drawings and weld specifications
• Detail-oriented with strong problem-solving and communication skills

Education:
Technical training or related education preferred but not required
Work Environment:
Manufacturing environment with exposure to welding operations, machinery, and production conditions.
#INDSXF]]> Thu, 26 Feb 2026 00:00:00 CST 0 The Weld Production II (Technician) is an intermediate-level welding role responsible for independently setting up, assembling, tacking, and welding steel components to meet engineering and customer specifications. This position emphasizes efficiency, weld quality, and the ability to work with minimal supervision while supporting overall production goals.Key Responsibilities:

• Independently set up and perform MIG welding on steel weldments
• Assemble and join parts according to blueprints and weld prints
• Complete tack and finish welds while maintaining dimensional accuracy
• Perform part preparation tasks including grinding, deburring, and cleaning welds
• Select and verify proper welding parameters and materials
• Monitor weld quality and make adjustments as needed
• Operate and maintain welding equipment following standard procedures
• Troubleshoot minor equipment or process issues
• Inspect finished parts using basic measuring tools
• Maintain organized work areas and equipment cleanliness
• Document production or quality-related notes when required
• Contribute to process improvements and efficiency initiatives
• Follow all safety policies and properly use required PPE

Qualifications:

• Previous welding or fabrication experience preferred (typically 2+ years)
• Proficiency in MIG welding and weld setup
• Ability to read and interpret blueprints and weld symbols
• Strong attention to detail and quality standards
• Ability to work independently in a production environment
• Good communication and teamwork skills
• Physically capable of standing, lifting, and handling materials

Education:
High school diploma or equivalent preferredWork Environment:
Manufacturing environment with exposure to welding equipment, machinery, noise, heat, and metal materials. Role involves standing, bending, lifting, and repetitive production tasks.
#INDSXF]]> Thu, 26 Feb 2026 00:00:00 CST 0 This entry-level welding role focuses primarily on MIG welding carbon steel components while supporting general production and part preparation activities. The position plays an important part in maintaining quality, efficiency, and safety within the welding process.Key Responsibilities:

• Perform MIG welding on carbon steel parts according to prints and specifications
• Assemble, tack, and prepare components for welding
• Clean, grind, de-bur, and finish welded parts
• Load and position materials at welding stations or fixtures
• Operate and monitor welding equipment to ensure consistent quality
• Conduct basic machine care, inspections, and daily cleaning
• Inspect parts using basic measuring tools and visual checks
• Follow production schedules, work orders, and standard procedures
• Maintain an organized and safe work area
• Assist with cross-training and other production tasks as needed

Qualifications:

• Entry-level position; prior welding or manufacturing experience is helpful but not required
• Basic understanding of fabrication or welding processes is a plus
• Strong attention to detail and willingness to learn
• Ability to work in a fast-paced production environment
• Good communication and teamwork skills
• Ability to perform physical production duties

Work Environment:
Manufacturing setting with exposure to welding equipment, moving machinery, noise, and varying temperatures. Regular standing, movement, and material handling required.
#INDSXF]]> Thu, 26 Feb 2026 00:00:00 CST 0 The Robotic Welder/Technician supports automated welding operations by operating robotic equipment, ensuring weld quality, and assisting with material preparation. This role focuses on precision, efficiency, and maintaining a safe production environment.Key Responsibilities:

• Set up and operate robotic welding equipment
• Load and position parts for accurate welding
• Inspect welds and completed parts for quality
• Perform minor grinding, repairs, or rework as needed
• Prepare materials through cleaning, fitting, or grinding
• Follow all safety procedures and guidelines
• Maintain a clean and organized work area
• Assist with troubleshooting or process improvements

Qualifications:

• High school diploma or equivalent preferred
• Prior manufacturing or robotic welding experience is a plus
• Strong attention to detail and reliability
• Ability to work in a fast-paced production setting
• Good communication and teamwork skills
• Physically able to stand, move, and handle materials

Work Environment:
Manufacturing setting with exposure to machinery, noise, and varying temperatures. Regular standing, movement, and material handling required.
#INDSXF]]> Thu, 26 Feb 2026 00:00:00 CST 0 This role involves utilizing our Warehouse Management System (WMS) to support daily warehouse operations, including picking outbound orders and restocking inventory received through inbound shipments. The position works closely with the existing warehouse team to ensure accuracy and efficiency throughout the process.Team members will have ongoing support, with at least one experienced staff member available at all times to assist with questions and troubleshoot any issues that may arise.
Hours: Monday through Friday 8AM-5PM
#INDSXF]]> Wed, 18 Feb 2026 00:00:00 CST 0 Key Responsibilities

• Pick, pack, and prepare orders for shipment
• Receive and organize incoming materials
• Move and handle products within the warehouse
• Perform basic quality and accuracy checks
• Maintain a clean, safe, and organized work area
• Follow work instructions and safety procedures
• Assist with general warehouse duties as needed

Qualifications

• Previous warehouse or production experience preferred but not required
• Ability to lift and move materials throughout the shift
• Reliable, punctual, and detail-oriented
• Ability to work independently and with a team
• Positive attitude and strong work ethic

Position Details

• Part-time schedule
• Temporary 3-month assignment
• Great opportunity for extra income or short-term work

#INDSXF]]> Wed, 11 Feb 2026 00:00:00 CST 0 Looking for a great way to earn extra cash? Part-time, as-needed event work available throughout the Sioux Falls area.
Pay: $16 per hour
Schedule: When needed for events
About the Role
Event staff help maintain a safe, professional, and organized environment at various event venues. Work assignments vary based on event needs and availability.Possible Work Locations May Include:
• Premier Center – Sioux Falls
• The Birdcage – Sioux Falls
• Howard Wood Field – Sioux Falls
• SDSU Stadium – Brookings
• Other local venues
Expectations
• Arrive on time and check in as instructed
• Remain alert, professional, and respectful
• Follow supervisor directions
• Stay at assigned post unless released
• Report issues immediately
Dress Code (Strictly Enforced)
• Black pants (no leggings, joggers, jeans, or shorts)
• Black closed-toe shoes
• Provided shirt or vestFailure to meet dress code may result in dismissal from the shift.
Not Allowed While Working
• Phone use at post (unless approved/emergency)
• Smoking, vaping, or tobacco use
• Alcohol before/during shift
• Leaving post without permission
Check-In Requirements
• Arrive 15– 30 minutes early
• Bring valid photo ID
• Check in with supervisor
• Receive assignment/uniform itemsPerfect opportunity to make extra money in your spare time.
#INDSXF]]> Wed, 11 Feb 2026 00:00:00 CST 0 Job OverviewThis position is responsible for supporting the sanding department by inspecting wood components, completing light repairs, and assisting with sanding and material movement throughout production. The Sanding Production Associate must follow work instructions, maintain quality standards, keep their work area clean and safe, and rotate between tasks to support workflow and reduce repetitive movement.
Primary Duties & ResponsibilitiesResponsibilities may vary based on daily production needs.

• Component Inspection & Repair: Check loose parts and identify defects. Perform small repairs as needed (example: applying putty during mid-inspection).
• Panel Catching: Remove panels from the panel sander and place finished panels into carts carefully and efficiently.
• Edge Sanding: Use a handheld orbital sander to smooth outer edges of doors and components for a clean finish.
• Material Handling / Runner: Move carts by pushing or pulling them to the correct work areas and staging locations throughout the facility.
  
  

Tools & Equipment Used

• Orbital sander
• Putty knife
  
  

Knowledge, Skills & Abilities

• Ability to read and understand work orders, product instructions, and job requirements
• Strong attention to detail and product quality
• Ability to communicate clearly with coworkers and supervisors
• Able to work independently while also supporting a team environment
  
  

Work Environment & Physical Requirements

• Standing for extended periods of time
  
  
• Working around sawdust and production debris
  
  
• Frequent use of hands to handle parts, tools, and finished components
  
  
• Lifting and transporting materials as needed
  
  
• Work is performed in a non-air-conditioned setting
  
  
• Summer temperatures may exceed 80° F with high humidity

Hourly Wage: $17
#INDSXF]]> Mon, 02 Feb 2026 00:00:00 CST 0 Position Overview:The Production Associate supports daily cabinet assembly operations by completing multiple hands-on tasks throughout the build and packaging process. This position requires following work instructions, checking work for quality and accuracy, maintaining a clean and safe workspace, and rotating between stations to support production flow and reduce repetitive motion.
Key Responsibilities:Duties may shift daily based on production needs.

• Hinge Installation: Operate hinging equipment and attach hinges to cabinet doors accurately and efficiently.
• Trim & Component Installation: Measure cabinet parts, confirm details against order paperwork, and install shelves, roll tray tracks, and inner cabinet components.
• Door & Drawer Assembly: Install drawer and roll tray tracks, hang cabinet doors, and assemble/install drawers using hand and power tools.
• Boxing & Packaging: Fold and prepare cardboard packaging, place completed cabinets into boxes, and ensure the product is secure and ready for shipment.

Tools & Equipment Used:

• Hinging machine
• Drill gun / screw gun
• Staple gun
• Utility knife
• Tape measure
• Table saw

Skills & Qualifications:

• Ability to read and follow order forms, measurements, and work instructions
• Strong attention to detail and product quality
• Ability to communicate clearly with supervisors and coworkers
• Dependable, team-focused, and willing to rotate between tasks
• Ability to know how to use/read a tape measure
  
  

Physical Requirements & Work Environment:

• Must be able to stand for extended periods of time
  
  
• Frequent bending, reaching, and positioning to install components
  
  
• Ability to lift and move cabinet parts and materials as needed
  
  
• Work is performed in a non-air-conditioned environment
  
  
• Summer conditions may exceed 80° F with high humidity

#INDSXF]]> Mon, 02 Feb 2026 00:00:00 CST 0 Key   Responsibilities are, however, will not be limited to:

• 
  
• Understand and adhere to instructions and procedures 
• Gather all necessary materials and equipment 
• Take precision measurements to ensure accurate component fit 
• Select or modify components according to measurements and specifications
• Align material assemble parts to cre complex units 
• Inspect finished products to ensure top quality 
• Maintain equipment in optimal condition
• Keep detailed records of products quantities and time
• Report on issues, malfunction or defective parts parts immediately 

What you will make as an Assembler all shifts is   GREAT PAY!
IMKO Pays Weekly on Fridays! IMKO offers Paid Holidays and Paid VacationGreat Pay plus differential pay on shifts  Apply online  www.imko.com - Stop into the IMKO office between 9 AM - 3 PMIMKO offers Medical Coverage - Access to affordable and comprehensive group medical coverage. If you have questions, please call us at 402-805-4373. 
IMKO Workforce Solutions is an Equal Opportunity Employer. IMKO Workforce Solutions conducts all employment practices without regard to race, sex, color, religion, national origin, age, disability, protected veteran' s status, pregnancy, genetic information, sexual orientation or any other basis prohibited by law.
#INDLIN]]> Tue, 13 Jan 2026 00:00:00 CST 0 Key   Responsibilities are, however, will not be limited to:

• Operating and maintaining machinery and production line equipment.
•   Monitoring products and removing faulty products.
•   Following and enforcing strict safety regulations and guidelines.
• Reporting any issues or malfunctions to supervisors.
•   Ensuring the workspace is clean and organized.
•   Keeping track of inventory and ordering materials as needed.
•   Inspecting products for defects and reporting any production issues to the supervisor.

What you will make as a Production Associate   all shifts is   GREAT PAY!
IMKO Pays Weekly on Fridays! IMKO offers Paid Holidays and Paid VacationGreat Pay plus differential pay on shifts  Apply online  www.imko.com - Stop into the IMKO office between 9 AM - 3 PMIMKO offers Medical Coverage - Access to affordable and comprehensive group medical coverage. If you have questions, please call us at 402-805-4373. 
IMKO Workforce Solutions is an Equal Opportunity Employer. IMKO Workforce Solutions conducts all employment practices without regard to race, sex, color, religion, national origin, age, disability, protected veteran' s status, pregnancy, genetic information, sexual orientation or any other basis prohibited by law.
#INDLIN

]]> Tue, 13 Jan 2026 00:00:00 CST 0
Requirements/other duties:
-Maintain contact supply of materials-Read Checklists & Work Orders-Prepare raw material-Cleaning grinders, barrels, and hopper loaders, all while following operation procedures  -Clean and organize work environment -Performing minor maintenance on equipment-Recording production and raw material usage in their inventory software -Stack, mark, pack work orders -Assisting techs in mold setups-Occasionally required to climb, stoop, kneel, crouch or crawl

Experience/abilities:
- Experience in a production environment preferred-Ability to lift and/or move up to 55 pounds
-Maintaining a safe and clean environment -Communicating skills needed-Complying with work requirements-Ability to stand for an entire 8-10 hour shift-Mathematical Skills (adding, subtracting, multiplication, and dividing all units of measure) -Language Skills (reading and comprehending simple instructions, ability to write, ability to present information in small group situations) 

IMKO Workforce Solutions is an Equal Opportunity Employer. IMKO Workforce Solutions conducts all employment practices without regard to race, sex, color, religion, national origin, age, disability, protected veteran' s status, pregnancy, genetic information, sexual orientation or any other basis prohibited by law.
#INDLIN]]> Tue, 13 Jan 2026 00:00:00 CST 0 Key   Responsibilities are, however, will not be limited to:

• Install molds using a hoist or forklift and ensure they are securely fitted in the press.
• Set up and shut down molds according to provided diagrams.
• Start machines, engage mechanisms, manage the feed, and closely monitor operations.
• Adjust machine controls to meet the required product specifications.
•   Replace worn machine accessories, including controls and switches.
• Maintain cleanliness of the press, molds, and individual parts.

What you will make as a Mold Technician all shifts is   GREAT PAY
IMKO Pays Weekly on Fridays! IMKO offers Paid Holidays and Paid VacationPay starts can start at $20 plus differential pay on shifts  Apply online  www.imko.com - Stop into the IMKO office between 9 AM - 3 PMIMKO offers Medical Coverage - Access to affordable and comprehensive group medical coverage. If you have questions, please call us at 402-805-4373. 
IMKO Workforce Solutions is an Equal Opportunity Employer. IMKO Workforce Solutions conducts all employment practices without regard to race, sex, color, religion, national origin, age, disability, protected veteran' s status, pregnancy, genetic information, sexual orientation or any other basis prohibited by law.
#INDLIN]]> Tue, 13 Jan 2026 00:00:00 CST 0

Help with production, including assembly, sanding, and machine operation

Follow written or demonstrated instructions

Keep work area clean and safe

Communicate well with coworkers and supervisors

Perform other tasks as needed

Tools & Equipment

• May use hand tools such as drills, tape measures, sanders, and staple guns
• May operate machinery (training provided)
• Required PPE includes safety glasses and ear plugs

General Requirements

• Must be 18 or older
• Basic reading and writing skills
• Ability to stand for long periods
• Ability to bend and twist throughout the shift
• Good attention to detail
• Good communication skills
• Able to work in a fast-paced, loud environment

Working Hours

• Monday– Thursday: 7: 00 AM – 5: 00 PM
• Friday: 7: 00 AM until work is finished (no later than 5: 00 PM)
• Occasional Saturdays if needed

#INDSXF]]> Tue, 06 Jan 2026 00:00:00 CST 0 Key Responsibilities

• Make sure product details match the order
• Ensure finish color matches approved samples
• Find and repair defects before packaging and shipping

General Requirements

• Must be 18 or older
• Basic reading and writing skills
• Ability to stand for long periods
• Ability to bend and twist during the shift
• Good communication with coworkers
• Able to work in a fast-paced environment
• Strong attention to detail
• Comfortable working in a loud manufacturing setting

#INDSXF]]> Tue, 06 Jan 2026 00:00:00 CST 0 Tue, 06 Jan 2026 00:00:00 CST 0   The Production Worker operates and maintains production line equipment, helps prepare and package products, and ensures safety, quality, and Good Manufacturing Practices are followed. This role supports smooth product flow through the production process and works as part of a team to complete assigned tasks.
Position Responsibilities:

• Work on the production line following all procedures; may rotate positions every 2 hours.
  
  
• Follow all safety rules, attend safety training, and report injuries or unsafe conditions immediately.
  
  
• Follow GMP, ServSafe, HACCP, SQF, OSHA, and company standards.
  
  
• Learn and support Lean Manufacturing, Six Sigma, and problem-solving practices.
  
  
• Perform general labor tasks.
  
  
• Stack products on pallets.
  
  
• Operate inserters, box/bag makers, pallet stackers, and other machines as needed.
  
  
• Start up and shut down production lines when required.
  
  
• Set up and change metal detectors and box tapers.
  
  
• Lift and stack 25-lb cases.
  
  

Required Qualifications:

• High school diploma or GED, or 1– 3 months of related experience/training. Must be 18 or older.
  
  
• Strong verbal and written communication skills; able to read instructions and labels.
  
  
• Basic math skills.
  
  
• Ability to understand instructions and solve problems.
  
  
• Electric pallet jack and HACCP certification preferred.

#INDSXF]]> Tue, 06 Jan 2026 00:00:00 CST 0 What You’ ll Do

• Keep machines and equipment running
• Handle repairs on electrical, mechanical, pneumatic, hydraulic, and HVAC systems
• Help with fabrication when needed
• Respond quickly when something goes down
• Work safely and help guide newer techs

What You Should Bring

• Strong experience fixing machines and troubleshooting
• Knowledge of pneumatics, hydraulics, and electrical work
• Ability to read schematics
• Good problem-solving skills and teamwork attitude
• Able to lift, climb, and work in different environments

#INDSXF]]> Tue, 30 Dec 2025 00:00:00 CST 0 Position Overview:The Plant Manager is responsible for overseeing all daily operations of the manufacturing facility to ensure safety, quality, productivity, and efficiency. This role provides leadership to production teams, manages supervisors and department leads, and ensures that all plant activities align with company goals and regulatory requirements.Compensation
Key Responsibilities:

• Oversee daily plant operations, including production, maintenance, quality, and safety.
• Manage and support department supervisors, team leads, and production staff.
• Ensure production goals are met by monitoring workflow, staffing levels, and equipment performance.
• Develop and enforce safety policies, procedures, and training to maintain a safe working environment.
• Maintain high product quality standards through oversight of quality control processes.
• Monitor inventory levels, material usage, and production scheduling.
• Coordinate maintenance activities to minimize downtime and ensure equipment reliability.
• Identify opportunities for process improvement and implement efficiency-driven solutions.
• Prepare reports related to production output, labor, quality issues, and operational performance.
• Work closely with HR on hiring, training, performance evaluations, and employee relations.
• Build a positive and collaborative working environment across all plant departments.
• Ensure compliance with OSHA regulations and company standards.

Qualifications

• Bachelor’ s degree in operations management, business, industrial engineering, or related field (preferred).
• 10+ years of manufacturing or production leadership experience.
• Strong understanding of production processes, maintenance, and quality control.
• Proven ability to lead and motivate teams in fast-paced environments.
• Excellent problem-solving, organizational, and communication skills.
• Knowledge of safety regulations and best practices.
• Ability to manage multiple priorities and respond quickly to operational needs.

Salary Range: $100, 000 – $140, 000 annually (based on experience and qualifications)
#INDSXF]]> Fri, 05 Dec 2025 00:00:00 CST 0 Location: Brookings, SD
Schedule: Part-time, as needed (primarily weekends)
Pay: Extra cash opportunities for flexible, on-call event work
Job Overview:
We are looking for dependable, energetic individuals to join our Event Staff team in Brookings. This role focuses on light security duties and general event support to help ensure a safe and smooth experience for all guests. Perfect for anyone looking to earn extra money on the weekends with a flexible, as-needed schedule.Responsibilities:

• Assist with guest entry by monitoring and operating metal detectors
• Perform light security duties, including checking bags and screening guests
• Walk designated areas throughout the event to ensure safety and smooth operations
• Provide excellent customer service by directing guests and answering questions
• Monitor crowd flow and report any concerns to event management
• Support event staff and security personnel as needed
• Maintain a professional and friendly demeanor at all times

Requirements:

• Must be reliable, punctual, and able to work independently
• Comfortable standing and walking for extended periods of time
• Ability to remain calm and professional in busy environments
• Must be able to follow instructions and communicate clearly
• Prior security or event work experience is a plus, but not required

Great For:

• Individuals looking for flexible weekend work
• Anyone wanting extra income without committing to a full-time schedule
• Students, part-time workers, or anyone open to occasional on-call shifts (18+)

#INDSXF]]> Mon, 17 Nov 2025 00:00:00 CST 0 Location: Sioux Falls, SD
Schedule: Part-time, as needed (primarily weekends)
Pay: Extra cash opportunities for flexible, on-call event work
Job Overview:
We are looking for dependable, energetic individuals to join our Event Staff team in Sioux Falls. This role focuses on light security duties and general event support to help ensure a safe and smooth experience for all guests. Perfect for anyone looking to earn extra money on the weekends with a flexible, as-needed schedule.Responsibilities:

• Assist with guest entry by monitoring and operating metal detectors
• Perform light security duties, including checking bags and screening guests
• Walk designated areas throughout the event to ensure safety and smooth operations
• Provide excellent customer service by directing guests and answering questions
• Monitor crowd flow and report any concerns to event management
• Support event staff and security personnel as needed
• Maintain a professional and friendly demeanor at all times

Requirements:

• Must be reliable, punctual, and able to work independently
• Comfortable standing and walking for extended periods of time
• Ability to remain calm and professional in busy environments
• Must be able to follow instructions and communicate clearly
• Prior security or event work experience is a plus, but not required

Great For:

• Individuals looking for flexible weekend work
• Anyone wanting extra income without committing to a full-time schedule
• Students, part-time workers, or anyone open to occasional on-call shifts (18+)

#INDSXF]]> Mon, 17 Nov 2025 00:00:00 CST 0 Summary of ResponsibilitiesResponsible for the proper setup of molds, troubleshooting, and adjusting the injection molding process to ensure efficient and consistent production of high-quality parts. Utilizes advanced processing techniques, machinery, and equipment to maintain optimal manufacturing performance.
Essential Duties and Responsibilities

1. Review setup sheets, quality instructions, and work orders to confirm job specifications and production standards.
2. Prepare raw materials for processing by setting up and cleaning dryers, loaders, grinders, and additive feeders.
3. Position, align, and secure molds to injection molding machines; connect waterlines, heaters, temperature controllers, and hydraulics according to setup instructions.
4. Start machines, produce initial samples, and collaborate with Quality Assurance to verify product compliance with customer specifications.
5. Document startup processes in setup notebooks and record daily machine cycle times.
6. Troubleshoot and adjust the injection molding process, including injection pressure, water temperatures, and melt temperatures, using digital and manual controls.
7. Monitor raw material quality and moisture levels to ensure consistent product standards.
8. Set up auxiliary equipment such as drill presses, fixtures, work tables, welders, hot stampers, and additive feeders.
9. Train and assist machine operators in proper handling techniques and ergonomically correct workstation setups.
10. Tear down setups and store tools and equipment in designated areas after use.
11. Report machinery or mold repair needs to maintenance or toolroom personnel and/or your immediate supervisor.
12. Expand and apply knowledge of materials, additives, and dyes to enhance processing efficiency.
13. Contribute to achieving production goals through active participation in daily operations.
14. Assist with weighing, counting, labeling, inventory, packaging, and storage of finished goods.
15. Prepare and apply packaging labels and maintain accurate run files.
16. Maintain a clean, organized, and safe work environment.
17. Support and implement Statistical Process Control (SPC) and other statistical quality methods.
18. Demonstrate a commitment to continuous improvement and total productivity by offering process improvement suggestions and assisting in implementation.
19. Apply knowledge of the four plastic variables and gate freeze principles to optimize production outcomes.

#INDSXF]]> Wed, 22 Oct 2025 00:00:00 CDT 0

Small, team-oriented, family-owned business

Shift differential pay for qualifying shifts

Opportunity for overtime with management approval

Stable, long-term employment with growth potential

Key Responsibilities

• Monitor and replenish materials to keep production running smoothly
• Operate forklifts and pallet jacks to move raw and finished goods
• Conduct quality checks to ensure product meets company standards
• Transfer completed products to inventory storage
• Maintain a clean and organized work area
• Support other departments as needed

Qualifications & Skills

• Previous experience in warehousing, production, or material handling preferred
• Strong attention to detail and organizational skills
• Ability to work independently and as part of a team
• Comfortable working in a fast-paced manufacturing environment
• Forklift operation experience required
• Ability to lift up to 50 lbs. and perform physically demanding tasks (standing, walking, climbing ladders)
• Strong communication, reading, and writing skills
• Tech-friendly: ability to use mobile-based company programs
• Reliable attendance and a strong work ethic

Apply today to become part of a supportive team where your work truly matters.
Preform Solutions, Inc. is an Equal Opportunity Employer.
#INDSXF]]> Tue, 27 May 2025 00:00:00 CDT 0 In this role, you will be responsible for the majority of the mold changes, mold setup, assembly line set up, troubleshooting, sampling new jobs and developing process improvements.
Essential Duties and Responsibilities include the following:

• Reads set up and quality instructions and work orders for specifications of job set up, quality specification and work order standards.
• Documents start up process and/or process changes in the press set up notebooks and daily records machine cycle times.
• Troubleshoots the molding and Life Floor equipment by making the appropriate adjustments to the machine.
• Sets up and cleans hoppers and other equipment to avoid contamination and to prepare raw materials for processing.
• Sets up fixtures, work tables, box holders, additive feeders and other appropriate equipment.
• Performs daily work station set ups and teardown including machine cleaning and auxiliary equipment set-ups.
• Troubleshoots equipment and make repairs as needed.
• Must keep work cells stocked.
• Responsible for the quality level of the raw materials (includes drying material) used in the molding process to assure quality product.
• Develops processing knowledge of materials, additives and dyes.
• Dismantle set up and puts equipment and tools in their proper storage area.
• Cleans, sprays and transports molds to racks for storage on a daily basis.
• Must understand and apply scientific molding principles.
• Must be trained in compression molding, compounding, injection & blow molding, and assembly areas.
• Reports needs for to appropriate personnel and/or immediate supervisor.
• Actively assists in maintaining production goals.
• Assists in weighing, counting, inventory reporting, packing and storage of finished product.
• Relieves operators for duties during rest periods.
• Responsible for keeping a clean and organized work area.
• Other Duties as assigned

Education and/or Experience: 

• High School diploma or GED; or up to three months related experience or training; or equivalent combination of education and experience.
• Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.
• Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
• The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to stoop, kneel, crouch, or crawl and taste or smell. The employee must regularly lift and /or move up to 40 pounds, frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.
• Software Knowledge: Microsoft Word, Microsoft Excel, IQ, NWA, Mini Tabs, Access

#INDSXF]]> Mon, 03 Mar 2025 00:00:00 CST 0 Responsibilities:

• Sort, open, & prepare incoming documents for scanning in accordance with department procedures, quality & time standards, including delivery to internal departments
• Prepare & index incoming documents in accordance with department procedures, quality & time standards, including delivery to internal departments
• Use multiple web-based tools to research and determine policy numbers to assign to paperwork received via mail, fax, web, or email.
• File documents in accordance with established procedures and guidelines.
• Maintain records in fiche, digital, and paper form and become knowledgeable of all company numbers in reference to policies or agent’ s
  names or codes.
• Perform routine quality control checks on departmental functions in accordance with established procedures and guidelines to ensure
  tasks are consistently completed in the correct manner as directed by up line.
• Operate scanning equipment used to create digital images using established procedures and guidelines.
• Perform data entry tasks by indexing digital images of mail, faxes, emails, and web-based documents in accordance with established
  procedures and guidelines, focusing on 100% accuracy.
• Update limited customer information in the system of record.
• Process inbound and outbound deliveries including UPS and FedEx.
• Operate mail equipment used for processing inbound and outbound mail, following safe operating procedures, quality control initiatives,
  and production time standards.
• Work closely with other departments to ensure accurate administration of customer requests through timely turnaround of e-mails, phone
  calls, internal mail deliveries, and outbound mail responsibilities.
• Cross-train where necessary to provide overall department and team support.
• Promote teamwork by supporting team members and sharing knowledge using the corporate shared values as the guide for all
  interactions.
• Assist with testing of system enhancements or conversions, including all steps necessary for implementation as well as follow-up of any
  items after implementation.
• Assist with Record Retention initiatives in accordance with established procedures and guidelines.
• Assist management with training new employees.
• As stated within the Company Attendance and Punctuality policy, regular attendance is required and expected to meet the
  business service levels and workflow demands.
• Other duties as assigned

Requirements:

• High School Diploma or equivalent preferred
• 1-2 years mail room, imaging, or other related administrative experience preferred
• Due to the financial nature and level of accountability of this position, a credit and criminal background check is required
• Strong Computer Skills
• Good written & verbal communication skills
• Demonstrated ability to work in a fast-paced environment with a high volume of work with minimal errors; high attention to detail
• Proven ability to multitask and efficiently navigate through multiple network systems throughout the day to locate alpha,
  agency, and policy lookups
• Strong problem-solving skills and adapt to frequent change
• Ability to work efficiently and independently
• Excellent organizational skills
• Ability to sit or stand for long periods of time
• Ability to lift and/or team lift 30 to 35 pounds on a regular basis

Apply today to confidentially discuss & to learn more!
#INDSXF]]> Tue, 15 Oct 2024 00:00:00 CDT 0 This is a first shift opportunity and hiring immediately.]]> Wed, 18 Sep 2024 00:00:00 CDT 0 IMKO Workforce Solutions is seeking a plumbing assembler for a production company in Brandon.   The ideal candidate will have plumbing experience, come to work daily and have a team mentality.
Requirements of Plumbing Assemblers:

• Previous manufacturing experience required
• Previous plumbing experience highly preferred
• Previous welding experience preferred
• Familiarity with hand tools and power tools
• Able to read a tape measure and blue prints
• Attention to detail is a must
• Ability to meet all safety standards
• High school diploma or equivalent
• Exceptional interpersonal skills
• Excellent attendance 
• Steel toed shoes are required
• Physical ability to perform the needs of the job including ability to lift up to 50 lbs.
• Pre-employment drug test and background check required

Benefits of this position to you include:

• Pays $17.50-23/hour 
• Opportunity to turn into a full-time role
• Hours are Mon-Fri 6 AM - 4: 30 PM with a 30 minute lunch

Responsibilities include:

• Performs advanced assembly functions
• Maintain focus on quality in all the work that you do ensuring that your processes are complete prior to the next area' s work beginning
• Set up and build all plumbing equipment 
• Puts parts in the proper position and then attaches them
• Uses basic tools to perform function

]]> Tue, 02 Jul 2024 00:00:00 CDT 0 Responsibilities

• Set up, adjust and operate machine tools determining speeds & feeds with the ability to align and secure holding fixtures, cutting tools, attachments & accessories
• Sequence automatic machine operations and define setup requirements, select cutting tools, and program proper feeds and speeds to successfully machine parts.
• Identify optimal manufacturing processes based on part configuration and batch size
• Inspect work, making necessary notations on work routers.
• The nature of the work is a mix of small to medium quantity runs with frequent set-ups.

Desired Qualifications

• Working knowledge of metal fabrication/forming practices and processes.
• Working knowledge of operating procedures for turning centers, drill/mill, and lathe.
• Ability to read and understand job specifications, shop drawings and blueprints.
• Ability to perform basic math computations associated with metal fabrication.
• Knowledge of properties of structural metal and related items.
• Mathematical aptitude
• Proficient in editing programs and adjusting offsets.
• Experience inspecting parts using various dimensional tools such as calipers, micrometers, bore scopes, test indicators and gauges.

Salary & Benefits:

• Competitive wage commensurate with experience
• Medical, Dental, Life and Vision Insurance
• 401(k) with company match
• Paid Time Off (PTO)
• Paid Holidays
• Company paid Short-Term and Long-Term Disability
• Overtime is often available - not mandatory
• High mix, low volume (Large Variety)
• Numerous Company hosted lunch events

#INDSXF]]> Tue, 20 Feb 2024 00:00:00 CST 0 Responsibilities

• Set up, adjust and operate machine tools determining speeds & feeds with the ability to align and secure holding fixtures, cutting tools, attachments & accessories.
• Sequence automatic machine operations and define setup requirements, select cutting tools, and program proper feeds and speeds to successfully machine parts.
• Identify optimal manufacturing processes based on part configuration and batch size.
• Inspect work, making necessary notations on work routers.
• The nature of the work is a mix of small to medium quantity runs with frequent set-ups.
• Lead and operate processes applicable to Pitot Tube production.

Desired Qualifications

• Working knowledge of metal fabrication/forming practices and processes.
• Working knowledge of operating procedures for turning centers, drill/mill, and lathe.
• Ability to read and understand job specifications, shop drawings and blueprints.
• Ability to perform basic math computations associated with metal fabrication.
• Knowledge of properties of structural metal and related items.
• Mathematical aptitude
• Proficient in editing programs and adjusting offsets.
• Experience inspecting parts using various dimensional tools such as calipers, micrometers, bore scopes, test indicators and gauges.
• Ability to lead/supervise processes, workload, and on-time shipments.

Salary & Benefits:

• Competitive wage commensurate with experience
• Medical, Dental, Life and Vision Insurance
• 401(k) with company match
• Paid Time Off (PTO)
• Paid Holidays
• Company paid Short-Term and Long-Term Disability
• Overtime is often available - not mandatory
• High mix, low volume (Large Variety)
• Numerous Company hosted lunch events

#INDSXF
]]> Tue, 20 Feb 2024 00:00:00 CST 0 Preferred 2 years experience in CNC machining.  Requirements of CNC Machinists:

• High school diploma or equivalent
• 2 year degree in a related area strongly preferred
• Good attitude and understands and adheres to company values
• Programming ability, the ability to make basic adjustments to machines
• 2 years+ of CNC machining experience required
• Deburring experience required
• Familiarity with using a caliper and a micrometer
• Mathematical reasoning ability
• Able to read blue prints
• Excellent attendance 
• Physical ability to perform the needs of the job, including able to lift up to 50 lbs.

Benefits of this position to you include:

• Pays between $23-27/hour depending on experience
• An excellent benefits package is available, including medical, dental, vision, 401k and tuition reimbursement
• An air conditioned shop
• Flexibility for 2 shifts, including a $1 shift differential for 2nd or 3rd shift
  • 2nd shift: 3: 30 PM – 2 AM Mon-Thurs
  • 3rd shift: 6 AM – 6: 30pm Friday-Sunday (this shift gets paid for 40 hours)
• Opportunity for overtime is available

Responsibilities include:

• Reviews documents showing production needs and ensures parts are created to meet those needs
• Sets up and operates machines
• Performs frequent set-ups as is necessary for production needs
• Meets safety, cleanliness, and quality standards

#INDSXF]]> Tue, 20 Feb 2024 00:00:00 CST 0 Janitor
IMKO Workforce Solutions is currently hiring for Janitors for a local company here in Lincoln, NE!
Starting pay for the Janitorial position is $13-$14 per hour with the potential to be brought on as a full time member of the organization!
Janitor Job Functions:

• Using equipment, commercial vacuums, and carpet cleaners
• Emptying Trash cans
• Dusting all surfaces 
• Washing Windows 
• Cleaning Vents

Job Qualifications  

• At least 6 months prior cleaning experience 
• Valid ID

Benefits:

• Weekly Pay 
• Health Insurance 
• Transportation assistance 
• Temp to hire 

IMKO Workforce Solutions is an Equal Opportunity Employer. IMKO Workforce Solutions conducts all employment practices without regard to race, sex, color, religion, national origin, age, disability, protected veteran' s status, pregnancy, genetic information, sexual orientation or any other basis prohibited by law. 
#INDLIN]]> Tue, 23 May 2023 00:00:00 CDT 0